[LAD] [ann] CAPS 0.9.5

[Bruno Gola]

Hi Tim,

Is there any special reason for you to set the Properties variable
inside ChorusI::setup() method? The setup() will always call the
autogen() method that will set Properties = HARD_RT anyway.

I ask this because ChorusI is the only plugin that sets it inside
setup() and it will break when I use a different Descriptor that
doesn't support the Properties attribute (talking about porting to LV2
here :)), and since it isn't doing much (unless I am missing something
here), it's ok to remove that line from the plugin code and let it to
the descriptor. What do you think?

Thanks for the amazing suite :D

Bruno

On Thu, Jan 17, 2013 at 2:21 PM, Gianfranco Ceccolini
<franconassis at gmail.com> wrote:
> Great!
>
> Thanks for your attention
>
>
>
> 2013/1/17 Tim Goetze <tim at quitte.de>
>>
>> [Gianfranco Ceccolini]
>> >One more thing. The new Cabinets have their gain limited to 0 dB.
>> >
>> >The old ones had 24 dB as the upper limit, which was very practical,
>> > since
>> >enabling the plugin would give me the tone improvement with a cost os
>> > some
>> >atenuation which would be compensated with some extra gain (about 9dB in
>> > my
>> >use).
>> >
>> >Is there a reason for this new limit of 0 dB?
>>
>> There's no technical reason, and it's safe to change the upper limit,
>> line 397 in Cabinet.cc.
>>
>> Cheers, Tim
>
>
>
>
> --
> Antes de imprimir pense em sua responsabilidade e compromisso com o MEIO
> AMBIENTE!
>
> _______________________________________________
> Linux-audio-dev mailing list
> Linux-audio-dev at lists.linuxaudio.org
> http://lists.linuxaudio.org/listinfo/linux-audio-dev
>



--
Bruno Gola <brunogola at gmail.com>
http://bgo.la/ | +55 11 9-5552-3599