Hi,<br><br><blockquote style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex" class="gmail_quote">
tl;dr: Is there a cheap midi hardware that just gets midi information in
 and routes it out, except on a different, single, channel which I can 
change easily up and down directly on the hardware?<br></blockquote><div><br>There is hardware stuff out there. Have a look for "hardware midi filter" or "hardware midi event processor". This one for instance: <a href="http://www.midisolutions.com/prodevp.htm">http://www.midisolutions.com/prodevp.htm</a><br>

<br>I have never used any of these so I can't say much more about them.<br><br><blockquote style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex" class="gmail_quote"> I know I can do the channel routing directly on my linux computer, 
after receiving the data and before sending it to a sampler. But that is
 inconvenient.<br></blockquote><div><br>You could write something in mididings that would could route the incoming midi data to different channels depending on what you press on your footpedal: <a href="http://das.nasophon.de/mididings/">http://das.nasophon.de/mididings/</a><br>

<br>Regards,<br><br>Kaspar<br></div> <br></div><br><br><div class="gmail_quote">On 22 March 2012 20:54, Nils <span dir="ltr"><<a href="mailto:list@nilsgey.de">list@nilsgey.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

Hello list,<br>
<br>
tl;dr: Is there a cheap midi hardware that just gets midi information in and routes it out, except on a different, single, channel which I can change easily up and down directly on the hardware?<br>
<br>
Long version:<br>
Recently my master keyboard broke. It was just a cheap, used m-audio keystation 49e. I did not buy a new master-keyboard because I have a Roland HP207e digital piano here which is vastly superior when it comes to actual playing. Sadly not to control midi data.<br>


<br>
I have a Behringer BCF2000 here which I connected to my keyboard now, so I should be able to do something with it, but there is one thing missing: Channel Changes.<br>
<br>
Anybody who worked with Linuxsampler knows that channel switching is very important to switch instruments, while program changes are neglectable.<br>
<br>
So maybe there is a way to use my piano, which always sends on the first channel (except I dive into inaccessible menus) if<br>
a) I find a way to shortcut the "change channel" command, but I don't know how. It has midi in and a usb connector, but that is not used to control it, just to send and receive midi data. Incoming data gets interpreted like a sampler does.<br>


<br>
b) There is a way to use my BCF2000. I am very inexperienced with that thing.<br>
<br>
c) There is a cheap standalone hardware, just a "little box", I can plugin between my linux box and the piano, which re-routes the midi data, like I mentioned in the short version above.<br>
<br>
d) I build something myself, a small linux plug computer where I somehow attach two buttons (ch up and dow) and use the usb connections. At least the cables are cheaper :)  But this is the most unrealistic method, although it might be the most interesting one.<br>


<br>
<br>
Maybe you know something?<br>
<br>
Nils<br>
<br>
P.S. I know I can do the channel routing directly on my linux computer, after receiving the data and before sending it to a sampler. But that is inconvenient.<br>
<br>
<br>
<br>
_______________________________________________<br>
Linux-audio-dev mailing list<br>
<a href="mailto:Linux-audio-dev@lists.linuxaudio.org">Linux-audio-dev@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/listinfo/linux-audio-dev" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-dev</a><br>
</blockquote></div><br>