[linux-audio-user] Advice for new users?

Steve Harris S.W.Harris at ecs.soton.ac.uk
Thu Oct 10 13:28:00 EDT 2002


On Thu, Oct 10, 2002 at 05:54:01PM +0100, Dave Griffiths wrote:
> > The other thing people should learn from CV sytems, is that frequency
> > is best represented as octaves, eg. 1volt (or 1.0f) per octave.
> 
> FWIW: In SSM the whole frequency range maps from -1 to 1 - so an un amplified
> oscillator modulating another oscillator sweeps the entire range. 

Yes, this is the problem, the CV value is linear with frequency, not
pitch (octaves). You define 0.0 to be a particular low frequency (say A0)
and then every +1.0 over that doubles the freqency, 1.0=A1, 2.0=A2 etc.

LFO's base frequencies are typically a few octaves down from ocilaotrs to
maintain sensible voltages.
 
> This could be changed now, as the signals no longer get clamped to that range.
> It would throw off all the FM synth patches I have though :)

Well, FM /is/ done with linear-by-frequency ofcourse, but I glossed over
that ;)

- Steve 



More information about the Linux-audio-user mailing list