[linux-audio-user] Terratec PHASE 28

[Petar Nedyalkov]

On Thursday 10 November 2005 16:58, conrad berhörster wrote:
> High Petar,
> you should update to ALSA 1.0.10. that helped me.
> can you record with your card?
> you can send me the complete amixer output offlist , if you want to.

Hello Conrad,

I tried installing alsa-drivers-1.0.10rc3 but after I ran alsaconf - a lot of 
the kernel modules could not be loaded because of "unknown symbol" errors.

I'm running Fedora Core 3.

I configured the package without any limitations - pure ./configure; make; 
make install

After running alsaconf I get:
---------------------
Loading driver...
Starting sound driver: snd-ice1724 FATAL: Error inserting snd_pcm 
(/lib/modules/2.6.11-1.35_FC3/kernel/sound/acore/snd-pcm.ko): Unknown symbol 
in module, or unknown parameter (see dmesg)
WARNING: Error running install command for snd_pcm
WARNING: Error inserting snd_ak4114 
(/lib/modules/2.6.11-1.35_FC3/kernel/sound/i2c/other/snd-ak4114.ko): Unknown 
symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec 
(/lib/modules/2.6.11-1.35_FC3/kernel/sound/pci/ac97/snd-ac97-codec.ko): 
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_ice1724 
(/lib/modules/2.6.11-1.35_FC3/kernel/sound/pci/ice1712/snd-ice1724.ko): 
Unknown symbol in module, or unknown parameter (see dmesg)
done
---------------------

And in `dmesg` I have:
---------------------
snd_pcm: disagrees about version of symbol snd_malloc_pages
snd_pcm: Unknown symbol snd_malloc_pages
snd_ak4114: Unknown symbol snd_pcm_stop
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ice1724: Unknown symbol snd_ac97_write_cache
snd_ice1724: Unknown symbol snd_pcm_new
snd_ice1724: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_ice1724: Unknown symbol snd_ac97_mixer
snd_ice1724: Unknown symbol snd_ak4114_create
snd_ice1724: Unknown symbol snd_ac97_bus
snd_ice1724: Unknown symbol snd_pcm_set_sync
snd_ice1724: Unknown symbol snd_pcm_lib_malloc_pages
snd_ice1724: Unknown symbol snd_pcm_lib_ioctl
snd_ice1724: Unknown symbol snd_pcm_lib_free_pages
snd_ice1724: Unknown symbol snd_pcm_set_ops
snd_ice1724: Unknown symbol snd_pcm_hw_constraint_list
snd_ice1724: Unknown symbol snd_pcm_hw_constraint_msbits
snd_ice1724: Unknown symbol snd_pcm_period_elapsed
snd_ice1724: Unknown symbol snd_pcm_hw_constraint_step
snd_ice1724: Unknown symbol snd_ac97_read
---------------------

Have you met this case? I even uninstalled 1.0.10rc3 and moved back to 
alsa-drivers 1.0.9 and it still had the same errors. 

You can find the amixer output from my working ALSA 1.0.9 installation as an 
attachment. Any ideas are appreciated.

>
> sizu c~
>
> Am Donnerstag 10 November 2005 14:29 schrieb Petar Nedyalkov:
> > Hello list,
> >
> > I've successfully installed ALSA on my server, having two Terratec PHASE
> > 28 cards. The problem is that from all 8 sound outs, the mixer recognises
> > as stereo pairs only four.
> >
> > The `amixer -c 0` output is as follows:
> >
> > Simple mixer control 'Master',0
> >   Capabilities: pvolume pswitch
> >   Playback channels: Front Left - Front Right
> >   Limits: Playback 0 - 255
> >   Front Left: Playback 255 [100%] [on]
> >   Front Right: Playback 255 [100%] [on]
> > Simple mixer control 'PCM',0
> >   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
> >   Playback channels: Mono
> >   Limits: Playback 0 - 128
> >   Mono: Playback 128 [100%] [on]
> > Simple mixer control 'Front',0
> >   Capabilities: pvolume pswitch
> >   Playback channels: Front Left - Front Right
> >   Limits: Playback 0 - 127
> >   Front Left: Playback 127 [100%] [on]
> >   Front Right: Playback 127 [100%] [on]
> > Simple mixer control 'Center',0
> >   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
> >   Playback channels: Mono
> >   Limits: Playback 0 - 127
> >   Mono: Playback 127 [100%] [on]
> > Simple mixer control 'LFE',0
> >   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
> >   Playback channels: Mono
> >   Limits: Playback 0 - 127
> >   Mono: Playback 127 [100%] [on]
> > Simple mixer control 'Side',0
> >   Capabilities: pvolume pswitch
> >   Playback channels: Front Left - Front Right
> >   Limits: Playback 0 - 127
> >   Front Left: Playback 127 [100%] [on]
> >   Front Right: Playback 127 [100%] [on]
> >
> > As you can see, the mixer controls Side and Front are stereo (i.e. have
> > two channels), but the mixer controls Center and LFE are mono.
> >
> > The same goes to my second Terratec PHASE 28 card.
> >
> > Unfortunately, I had installed the same versions of ALSA and the channels
> > were OK. But after I reinstalled my server - the Center and LFE stereo
> > channels became mono.
> >
> > I'm using ALSA drivers 1.0.9, ALSA utils 1.0.9 and ALSA lib 1.0.9.
> >
> > Has anyone solved this problem? I need 4 stereo channels but not 2 stereo
> > and 2 mono.

-- 

Cyberly yours,
Petar Nedyalkov
Devoted Orbitel Fan :-)

PGP ID: 7AE45436
PGP Public Key: http://bu.orbitel.bg/pgp/bu.asc
PGP Fingerprint: 7923 8D52 B145 02E8 6F63 8BDA 2D3F 7C0B 7AE4 5436
-------------- next part --------------
A non-text attachment was scrubbed...
Name: amixer.log
Type: text/x-log
Size: 2987 bytes
Desc: not available
Url : http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20051111/6e41a419/attachment.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20051111/6e41a419/attachment.pgp