Hello Fons,<br><br>
Yeah, I can't understand what's going on. The odd thing is that I tried
with different monitors (Roland DM-20) and the signal level seems fine,
a little high but not as dramatically high as with the ADAMs... I have
no idea what's going on. I just got response from Edirol's support and
their only suggestion is to use a mixer (and the mention the +4dBu
nominal output). I'll try now contacting ADAM's support.<br>
<br>
Cheers,<br>
<br>
Hector<br><br><div><span class="gmail_quote">On 8/24/07, <b class="gmail_sendername">Fons Adriaensen</b> <<a href="mailto:fons@kokkinizita.net">fons@kokkinizita.net</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On Fri, Aug 24, 2007 at 12:29:52PM -0400, Hector Centeno wrote:<br><br>> ... but the problem is that if I lower the volume on the<br>> software side and I increase the level on the monitors, then I start hearing<br>
> a lot of noise mixed with the (now lower) sound signal (since the analog out<br>> of the FA-101 is still high).<br><br>Still this is not normal. The nominal output level of the FA101 is<br>+4dBu, nothing special, with a S/N ratio of over 100 dB. The maximum
<br>SPL of the ADAM A7 is somthing like 105 dB, so even if its nominal<br>input level is 20dB lower than the output of the FA101 the noise<br>level should be 25dB, which is imperceptible even in a very quiet<br>room.<br><br>
Something is not working right here.<br><br><br>--<br>FA<br><br>Follie! Follie! Delirio vano è questo !<br><br><br></blockquote></div><br><br clear="all"><br>-- <br>===============================<br><a href="http://www.hcenteno.net">
http://www.hcenteno.net</a>