<div dir="ltr">Hello,<br><br>I bought an edirol fa-66 which doesn&#39;t work on my ACER 7720 laptop (freebob).<br>I tried a few things (disable cpu&nbsp; frequency scaling, change priority with setpci, <br>rtirq script...) without success. I have a Ricoh firewire controller, and I read <br>
it can be buggy with firewire audio cards. <br><br>Therefore I bought an expresscard firewire... and I cannot manage to use it !! <br>I&#39;m aware it isn&#39;t really an audio issue, but if someone here know the answer<br>
(or maybe you have an idea where else I could have help ?)...<br><br>It seems recognized as PCI device, but not as firewire. lspci -v gives :<br><br>02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])<br>
&nbsp;&nbsp;&nbsp; Flags: bus master, fast devsel, latency 0<br>&nbsp;&nbsp;&nbsp; Bus: primary=02, secondary=03, subordinate=03, sec-latency=0<br>&nbsp;&nbsp;&nbsp; Capabilities: [50] Power Management version 2<br>&nbsp;&nbsp;&nbsp; Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-<br>
&nbsp;&nbsp;&nbsp; Capabilities: [80] Subsystem: Gammagraphx, Inc. Unknown device 0000<br>&nbsp;&nbsp;&nbsp; Capabilities: [90] Express PCI/PCI-X Bridge IRQ 0<br><br><br>I tried &quot;modprobe pciehp pciehp_force=1&quot;, &quot;modprobe pci_hotplug&quot; but same thing...<br>
I tried to plug the card before boot (just a few seconds after turning the laptop on, <br>it freezes if I plug it before...) and after.<br><br>/var/log/syslog while I plus the card :<br><br>Sep&nbsp; 4 12:04:29 felicien kernel: [&nbsp; 229.518609] pciehp: Card present on Slot(0002_0000)<br>
Sep&nbsp; 4 12:04:29 felicien kernel: [&nbsp; 229.545152] hub 1-0:1.0: over-current change on port 2<br>Sep&nbsp; 4 12:04:30 felicien kernel: [&nbsp; 229.803697] pciehp: No bus number available for hot-added bridge 0000:02:00.0<br>Sep&nbsp; 4 12:04:30 felicien kernel: [&nbsp; 229.803765] program_fw_provided_values: Could not get hotplug parameters<br>
Sep&nbsp; 4 12:04:30 felicien NetworkManager: &lt;debug&gt; [1220522670.621720] nm_hal_device_added(): New device added (hal udi is &#39;/org/freedesktop/Hal/devices/pci_104c_8231&#39;).<br><br><br>If you have an idea... thanks a lot !<br>
<br><br><br><br></div>