<br><br><div class="gmail_quote">On Sun, May 3, 2009 at 5:49 PM, Dominic Sacré <span dir="ltr"><<a href="mailto:dominic.sacre@gmx.de">dominic.sacre@gmx.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="im">On Sunday 03 May 2009 23:05:07 Bill Allen wrote:<br>
> I have set two footswitches to send CC-26 1<br>
> and CC-26 0 respectively. Then in jack-rack I bind the Enable button to<br>
> MIDI Controller 26 Min Value 0, Max Value 1. The good news is that when I<br>
> hit the CC 26 0 switch, if the enable switch for the filter is active, it<br>
> goes off. Half the battle won. But, I can't get the filter enable to go<br>
> on with anything I've tried. Using PD I've verified that the pedal is<br>
> sending the CC 26 1, but still no joy.<br>
><br>
> Any clues or helpful hints?<br>
<br>
</div>The on/off controls in jack-rack can be enabled by sending a controller<br>
value of 127. All values other than 0 and 127 do nothing.<br>
<br>
By the way, you may be interested in the UnO firmware for the FCB1010:<br>
<a href="http://www.ossandust.be/" target="_blank">http://www.ossandust.be/</a><br>
One of the many improvements over the official Behringer firmware is a<br>
stompbox mode, which would allow you to use a single button on the FCB1010<br>
to toggle the effect, with the button's LED showing whether the effect is on<br>
or off.<br>
</blockquote><div><br>Thanks, that worked. And thanks for the tip. That sounds like exactly what I need.<br> <br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
<br>
Dominic<br>
_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user</a><br>
</blockquote></div><br>