OK, I know this is a 3rd level niche question, but if anybody has a clue it would be helpful.<br><br>I can bind the expression pedal to any of the sliders in jack-rack. For example, I bind one of the expression pedals which is set to send midi CC 27 events to the Cutoff Frequency slider of the Glame Butterworth X-over Filter and I've got a wah-wah pedal. <br>
<br>This is great, but the other thing that I want to be able to do is bind some of the footswitches to the Enable button for this and other jack-rack filters. This would be very useful in a live situation to be able to punch filters out and into the chain. It sounds like it ought to be easy, but I've been knocking my head over it. I have set two footswitches to send CC-26 1 and CC-26 0 respectively. Then in jack-rack I bind the Enable button to MIDI Controller 26 Min Value 0, Max Value 1. The good news is that when I hit the CC 26 0 switch, if the enable switch for the filter is active, it goes off. Half the battle won. But, I can't get the filter enable to go on with anything I've tried. Using PD I've verified that the pedal is sending the CC 26 1, but still no joy.<br>
<br>Any clues or helpful hints?<br><br>Regards,<br>Bill<br>