Hello all,<br>Same problem over here, after installing fltk2 the fltk/Color.h problem was solved and it installed correctly.<br><br>Now on the startup stage I'm getting this error, which seems to be related to jack or midi setup:<br>
<br>Error, failed to start jack midi thread: 1<br>
So sad, failed to start MusicIO<br><br>***** here's the entire output:<br><br>diego@diego-laptop:~$ /usr/bin/jackd -dalsa -dhw:0,0 -r44100 -p1024 -n2 &<br>[1] 8456<br>diego@diego-laptop:~$ no message buffer overruns<br>
jackd 0.116.1<br>Copyright 2001-2005 Paul Davis and others.<br>jackd comes with ABSOLUTELY NO WARRANTY<br>This is free software, and you are welcome to redistribute it<br>under certain conditions; see the file COPYING for details<br>
<br>JACK compiled with System V SHM support.<br>loading driver ..<br>SSE2 detected<br>apparent rate = 44100<br>creating alsa driver ... hw:0,0|hw:0,0|1024|2|44100|0|0|nomon|swmeter|-|32bit<br>control device hw:0<br>configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods<br>
ALSA: final selected sample format for capture: 32bit integer little-endian<br>ALSA: use 2 periods for capture<br>ALSA: final selected sample format for playback: 32bit integer little-endian<br>ALSA: use 2 periods for playback<br>
<br>diego@diego-laptop:~$ <br>diego@diego-laptop:~$ <br>diego@diego-laptop:~$ yoshimi <br>SSE2 detected<br>Error, failed to start jack midi thread: 1<br>So sad, failed to start MusicIO<br>Yoshimi stages a strategic retreat :-(<br>
Floating point exception<br>diego@diego-laptop:~$ <br>diego@diego-laptop:~$ <br><br><br>Any idea on this error?<br>Thank you very much in advance,<br>BR<br>Diego<br><br><br><div class="gmail_quote">2010/1/13 David Adler <span dir="ltr"><<a href="mailto:david.jo.adler@gmail.com">david.jo.adler@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div class="im">On Tue, Jan 12, 2010 at 8:26 PM, cal wrote:<br>
> The main change in 0.051 is to the recorder start logic, which sort of goes like -<br>
> - Select your wav file, and the recorder becomes armed.<br>
> - When armed, recording starts with the first note-on event, or a click on<br>
> the Record button.<br>
> - When armed, a click on the Stop button disarms the recorder.<br>
> - When recording, a click on the Stop button stops the recorder, leaving it<br>
> armed.<br>
><br>
> <<a href="http://sourceforge.net/projects/yoshimi/files/" target="_blank">http://sourceforge.net/projects/yoshimi/files/</a>><br>
><br>
<br>
<br>
</div>The sourceforge link seems to be outdated, still on version 0.047.1.<br>
No problen, good old<br>
<a href="http://www.graggrag.com/?q=node/19" target="_blank">http://www.graggrag.com/?q=node/19</a><br>
is up to date.<br>
<br>
A build error:<br>
<br>
<br>
/home/abs/yoshimi/src/yoshimi-0.051/src/MasterUI.h:28:24: error:<br>
fltk/Color.h: No such file or directory<br>
[...]<br>
Aborting...<br>
<br>
<br>
installing fltk2 resolved it.<br>
Next, on startup:<br>
<br>
<br>
$ yoshimi<br>
gzopen failed, errno 2, No such file or directory<br>
Error, xml file /home/user/.zynaddsubfxXML.cfg could not be loaded or<br>
uncompressed<br>
BUG!: XMLwrapper::peek() - empty parentstack<br>
BUG!: XMLwrapper::peek() - empty parentstack<br>
<br>
<br>
I found a .zynaddsubfxXML.cfg online from trinity. With that it<br>
worked, though with an unusual layout.<br>
I unsuccessfully looked for other .cfg files to use (using google<br>
and searching zynadd 2.4.0/zynadd git). I'd love to have<br>
one that gives the old layout.<br>
<br>
The whole story is the same with yoshimi 0.052-pre1<br>
<br>
Thanks for zyn, thanks again for yoshimi,<br>
<br>
best,<br>
d<br>
<br>
> Bon apetit.<br>
><br>
thanks, tasty miso soup on my table :)<br>
<div><div></div><div class="h5">_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
</div></div></blockquote></div><br>