Hi,<br><br>thanks for your answers!<br><br>first I tried the steps indicated by Brian in the blog:<br><br>$ sudo apt-get update<br><br>$ sudo apt-get install madfuload<br><br>sudo /etc/init.d/udev restart (it doesn't works may be because I'm using ubuntu 9.10 but I executed sudo service udev restart)<br>
<br>The Ozone was plug in and power on<br><br>$ dmesg |tail <br>I don't see the line "usbcore: registered new interface driver snd-usb-audio", this is what I have<br><br>[ 734.540734] sd 4:0:0:0: [sdc] Assuming drive cache: write through<br>
[ 734.540739] sd 4:0:0:0: [sdc] Attached SCSI disk<br>[ 2028.689627] udev: starting version 147<br>[ 2125.877654] udev: starting version 147<br>[ 2191.261798] udev: starting version 147<br>[ 2206.913521] udev: starting version 147<br>
[ 2211.761776] udev: starting version 147<br>[ 2221.504031] usb 2-1: USB disconnect, address 3<br>[ 2262.168058] usb 2-1: new full speed USB device using uhci_hcd and address 4<br>[ 2262.327285] usb 2-1: configuration #1 chosen from 1 choice<br>
<br>$ aplay -l<br>**** Lista de PLAYBACK Dispositivos Hardware ****<br>tarjeta 0: Intel [HDA Intel], dispositivo 0: ALC888 Analog [ALC888 Analog]<br> Subdispositivos: 1/1<br> Subdispositivo #0: subdevice #0<br>tarjeta 0: Intel [HDA Intel], dispositivo 1: ALC888 Digital [ALC888 Digital]<br>
Subdispositivos: 1/1<br> Subdispositivo #0: subdevice #0<br><br>just appear the Intel card (actually it is the audio coming with the motherboard) and the Ozone still refuse to be subdue :-)<br><br>After all I tried with the Bengt solution:<br>
$ sudo /et/init.d/hal restart (in ubuntu 9.10 sudo restart hal)<br><br>and nothing, could be I omitted some step or may be I have to do something more...I really would appreciate your help about it.<br><br>Regards<br>Russo<br>
<br><br><div class="gmail_quote">2010/1/24 Jostein Chr. Andersen <span dir="ltr"><<a href="mailto:jostein@vait.se">jostein@vait.se</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
söndag januari 24 2010 09.52.07 skrev Bengt Gördén:<br>
...<br>
<div class="im">> It might be enough just to restart the hal system.<br>
><br>
> sudo /et/init.d/hal restart<br>
<br>
</div>You're right, and here is the Fedora 10 version:<br>
<br>
/etc/init.d/haldaemon restart<br>
<br>
Works like a charm. :-)<br>
<br>
Thanks! Jostein<br>
<div><div></div><div class="h5">_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br>Russo<br><a href="http://www.bitacoradelrusso.blogspot.com">http://www.bitacoradelrusso.blogspot.com</a><br><br>Recicla, Reduce, Reutiliza<br>