Hey Patrick,<br><br>A word of warning: I haven't used amSynth at all, but the general principles should be the same for all synths (generalised statement after generalised statement!).<br><br>Basically your signal chain should go:<br>
<br>Oscillators -> Filter in -> Output<br> ^<br> |<br> LFO<br><br>So you should feed the connect the oscillators to the Glame Lowpass input as well.<br>
<br>Hope this makes sense!<br><br>Andrew<br><br><div class="gmail_quote">On Sat, Jun 5, 2010 at 6:11 PM, Patrick Shirkey <span dir="ltr"><<a href="mailto:pshirkey@boosthardware.com">pshirkey@boosthardware.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><br>
> Hey Jeremy,<br>
><br>
> You sure that amsynth can't pull off a dubstep wobble bass?<br>
> The ingredients are relatively simple:<br>
><br>
> One lowpass filter<br>
> One LFO routed to the filter cutoff<br>
> One or Two Oscillators (I'd say having a sine or triangle an octave lower<br>
> or<br>
> at the same pitch as the other oscillator would be good here).<br>
><br>
> Then just filter the oscs quite low to remove the highs and set the LFO<br>
> running fairly fast-ish!<br>
><br>
<br>
<br>
Just trying this setup out.<br>
<br>
I have the following:<br>
<br>
> One lowpass filter<br>
> One LFO routed to the filter cutoff<br>
<br>
LFO sine output -> Glame Low pass input<br>
<br>
Check<br>
<br>
> One or Two Oscillators (I'd say having a sine or triangle an octave lower<br>
> or at the same pitch as the other oscillator would be good here).<br>
><br>
<br>
Que?<br>
<br>
If you could clarify what the two oscillators are supposed to connect to<br>
then I will build this example and post it here for everyone to play with.<br>
<br>
<br>
Cheers.<br>
<br>
<br>
> Andrew.<br>
><br>
> On Sat, Jun 5, 2010 at 12:55 PM, Jeremy Jongepier<br>
> <<a href="mailto:jeremy@autostatic.com">jeremy@autostatic.com</a>>wrote:<br>
><br>
>> Harry Van Haaren wrote:<br>
>> >> With the help of some manuals I managed to create a pretty ok Dubstep<br>
>> >> wobble bass in Yoshimi.<br>
>> >><br>
>> ><br>
>> > Cheers, there's too much going on at the moment for me to properly<br>
>> check<br>
>> it<br>
>> > out,<br>
>> > hopefully tomorrow I'll get to load it up though.<br>
>> ><br>
>> > Glad there was such a response.. nice to have fellow "wobble bass"<br>
>> peoples<br>
>> > about!<br>
>> > -Harry<br>
>> ><br>
>><br>
>> Hello Harry,<br>
>><br>
>> You're welcome. And apparently my Dubstep instrument for Yoshimi was<br>
>> good enough to get included in the latest Yoshimi release (thanks<br>
>> Cal!!). If you want to control the wobbles it is possible to set the<br>
>> Freq. LFO to zero and insert a Phaser effect in the chain and control<br>
>> its LFO with NRPN messages. I took a look at it yesterday but apparently<br>
>> my M-Audio Oxygen doesn't send out correct NRPN messages so Yoshimi<br>
>> doesn't pick them up or I simply don't understand how to properly<br>
>> program the right NRPN stuff). But I just got some new toys in (a<br>
>> Behringer BCF2000 and a BCR2000), hopefully I'll get it to work with<br>
>> those. Otherwise it would be an option to fire up an instance of<br>
>> Rakarrack with a Phaser effect and control the LFO of the Phaser with<br>
>> MIDI.<br>
>> I've also taken a look at PHASEX but I don't grasp how everything is<br>
>> routed internally so I just don't manage to get anything useful out of<br>
>> it.<br>
>> amSynth is not suited for Dubstep wobbles, it simply lacks the proper<br>
>> functionality.<br>
>> Maybe Bristol could pull the trick too.<br>
>><br>
>> For those who have no clue what this is about:<br>
>> <a href="http://www.youtube.com/watch?v=IsQMpJ5lURQ" target="_blank">http://www.youtube.com/watch?v=IsQMpJ5lURQ</a> (a classic that we spin<br>
>> regularly at our parties)<br>
>><br>
>> Best,<br>
>><br>
>> Jeremy<br>
>> _______________________________________________<br>
>> Linux-audio-user mailing list<br>
>> <a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
>> <a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
>><br>
> _______________________________________________<br>
> Linux-audio-user mailing list<br>
> <a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
> <a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
><br>
<font color="#888888"><br>
<br>
--<br>
Patrick Shirkey<br>
Boost Hardware Ltd.<br>
<br>
</font></blockquote></div><br>