Hi <br><br>More tests revealed I actually got some output sound but at a very low level (even if all knobs are turned to max, including the software's output).<br><br>Any ideas ?<br><br>Who could I turn to ?<br><br>thanks<br>
<br>jy<br><br><div class="gmail_quote">2010/6/23 Jean-Yves Poilleux <span dir="ltr"><<a href="mailto:jypllx@gmail.com">jypllx@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Hi<div>I'm not sure this is the right place fot this message but I try anyway...</div><div><br></div><div>I've used a M-Audio mobilPre USB soundcard (the older non USB compiant version) on Karmic Koala without trouble, using the madfuload 1.2 firmware loader. This firmware allows to use this older version of the soundcard on Ubuntu. But since I upgraded to Lucid Lynx, it doesn't seem to work anymore.</div>
<div><br></div><div>I started jack using this card and meterbridge showed there was some input signal coming in but nothing came out of my speakers.</div><div><br></div><div>Anyone encountered this kind of problem ?</div>
<div><br></div><div>Thanks a lot</div><div>jy</div><div><br></div><div>here are some logs</div><div><br></div><div>"cat /proc/asound/cards"</div><div><div> 0 [Intel ]: HDA-Intel - HDA Intel</div><div> HDA Intel at 0xf0400000 irq 22</div>
<div> 1 [MobilePre ]: USB-Audio - MobilePre</div><div> M Audio MobilePre at usb-0000:00:1d.2-2, full speed</div></div><div><br></div><div>"aplay -l"</div><div><div>carte 0: Intel [HDA Intel], périphérique 0 : ALC888 Analog [ALC888 Analog]</div>
<div> Sous-périphériques: 1/1</div><div> Sous-périphérique: #0: subdevice #0</div><div>carte 0: Intel [HDA Intel], périphérique 1 : ALC888 Digital [ALC888 Digital]</div><div> Sous-périphériques: 1/1</div><div> Sous-périphérique: #0: subdevice #0</div>
<div>carte 0: Intel [HDA Intel], périphérique 3 : NVIDIA HDMI [NVIDIA HDMI]</div><div> Sous-périphériques: 1/1</div><div> Sous-périphérique: #0: subdevice #0</div><div>carte 1: MobilePre [MobilePre], périphérique 0 : USB Audio [USB Audio]</div>
<div> Sous-périphériques: 1/1</div><div> Sous-périphérique: #0: subdevice #0</div></div><div><br></div><div><br></div>
</blockquote></div><br>