<i>It might be that your BIOS allows selecting interrupts for devices.
Other then<br>
that I fear you are completely out-of-luck with that laptop for
firewire-audio.</i><br><br>I cant change my interrupts in BIOS unfortunately . But when I run Win xp on this computer I can record four tracks simultaneously with 10ms latency or mix 8 tracks with plugins. So this should not be a hardware issue.<br>
<br><br><i>A side-note: There is a reason the ffado-README contains instructions
what to<br>
report in case of errors. Mostly a verbose log of jack. And the output
of<br>
ffado-diag...</i><br><br><br>This last bit I dont understand..<br><br>Thanks for your help<br><br>Thomas<br><div class="gmail_quote">2010/6/25 Arnold Krille <span dir="ltr"><<a href="mailto:arnold@arnoldarts.de">arnold@arnoldarts.de</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">Hi,<br>
<div class="im"><br>
On Friday 25 June 2010 15:55:06 Thomas Hedegaard wrote:<br>
> I have a problem with jack. I have a Edirol fa-101 firewire soundcard on<br>
> amd processer (2500+) with 512Mb RAM. If i have low frames/period setting<br>
> ( 128) jack shots down after short time (2 - 20 sec or almost instantly if<br>
> I run a program; ardour or openoffice) or if I have a high frames/period<br>
> setting (1024) I get xruns.<br>
> I have tried almost every setting possible and tried changing nice values<br>
> on the firewire card and a lot of other stuff.<br>
<br>
</div>Changing nice-values will not help because:<br>
<div class="im"><br>
> 10: 445734 XT-PIC-XT ohci1394, yenta,<br>
> radeon@pci:0000:01:05.0<br>
<br>
</div>...your firewire-controller shares its interrupt with the graphics card. That<br>
will almost always make problems.<br>
And using a pccard won't help you, as your pccard-slot shares that same<br>
interrupt as well. Bummer.<br>
<br>
It might be that your BIOS allows selecting interrupts for devices. Other then<br>
that I fear you are completely out-of-luck with that laptop for firewire-audio.<br>
<div class="im"><br>
> My Firewire card:*<br>
> thomas@thomas-laptop:~$ lspci | grep Fire<br>
> 00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire Controller<br>
> (rev 02)<br>
<br>
</div>I think that one should work (if it wasn't sharing the interrupt).<br>
<br>
A side-note: There is a reason the ffado-README contains instructions what to<br>
report in case of errors. Mostly a verbose log of jack. And the output of<br>
ffado-diag...<br>
<br>
Have fun,<br>
<font color="#888888"><br>
Arnold<br>
</font><br>_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
<br></blockquote></div><br>