<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>The AKS is non functional, it is documented somewhere on the website but I will consider adding a big capital letter disclaimer for the few that are unfinished. If you start it with -libtest you can just see the GUI, I use that during development.<br><br>The Rhodes is the DX algorithm with a preset. Will have a look at it here. Bristol is not going to be the best Rhodes you will find on open source, It's not even the best Rhodes emulator in bristol! some soundfonts and most samples will give you better results.<br><br>Regards, nick<br><br>> From: compose59@gmail.com<br>> Date: Sun, 12 Dec 2010 14:17:41 +0300<br>> Subject: Re: [LAU] bristol synths hang<br>> To: nickycopeland@hotmail.com<br>> CC: rennabh@gmail.com; linux-audio-user@lists.linuxaudio.org<br>> <br>> On Sun, Dec 12, 2010 at 12:56 PM, alex stone <compose59@gmail.com> wrote:<br>> > Nick, just updated to 0.60.7 (Gentoo Ebuild), added your suggested cli<br>> > options to a bristolrc, and all is good so far.<br>> ><br>> > Gentoo 64bit, 2.6.33.7-RT.<br>> ><br>> > Regards,<br>> ><br>> > Alex.<br>> ><br>> > --<br>> > www.openoctave.org<br>> ><br>> > midi-subscribe@openoctave.org<br>> > development-subscribe@openoctave.org<br>> ><br>> <br>> Nick, been through the synths, and only 2 seem to be a bit problematic, so far.<br>> aks- opens, but no jack or alsa ports appear, and it zombifies shortly<br>> after that.<br>> rhodes- opens, and is playable, but runs CPU up to 100 percent, and<br>> hangs, which then needs to be killed off in a terminal.<br>> <br>> Alex.<br>> <br>> -- <br>> www.openoctave.org<br>> <br>> midi-subscribe@openoctave.org<br>> development-subscribe@openoctave.org<br> </body>
</html>