<p dir="ltr">On Oct 30, 2012 12:44 AM, "Lewis Pike" <<a href="mailto:phaselocker@gmail.com">phaselocker@gmail.com</a>> wrote:<br>
> I've too have an M-Audio Fast Track Pro and I've found that it's audio<br>
> capture works unreliably under Linux.  I only tested it using arecord<br>
> and I have not tried Jack.<br>
><br>
> I find that on random takes the audio will become heavily distorted.<br>
> Usually this sounds as though additional gain is being introduced and<br>
> there is what sounds like very audible quantization distortion.  Once<br>
> the problem appears, it persists until the device is reset.</p>
<p dir="ltr">Thanks for this... so, 46 ms latency in my concert and count myself lucky it isn't worse. And, replace the ftpro when I can...</p>
<p dir="ltr">> If you are able to successfully configure this device for recording in<br>
> any capacity you are doing better than me.</p>
<p dir="ltr">My experience using it with Jack is: if audio input is correct when Jack starts, then it stays OK as long as the Jack server is running. I have also seen the problem with default Jack settings, but rarely, certainly less often than you report. The difference is that I start Jack and keep it running for a whole session, maybe several hours, while in your case, arecord connects to the hardware fresh on every take, raising the probability of a failed take.</p>

<p dir="ltr">I'm fairly certain if you use Jack and keep one connection to the Fast Track alive for a longer time, the issue will not go away totally, but it's manageable. Check for good input at the start of the session, and then you should be OK.</p>

<p dir="ltr">hjh</p>