Hi Len!<div><br></div><div>Clemens has just pointed out to me on the ALSA dev list, as you had rightly guessed, that all my devices inputs get routed through its single pair of stereo capture ports according to its datasheet.</div>
<div><br></div><div>I did have a quick go at recording from these inputs when I had the spdif input connected to my CD player but no dice. I was using a CDR as source so copy protection wasn't an issue.</div><div><br>
</div><div>As I think I've already stated, I have zero experience with using SPDIF under Linux or any other OS so I don't know the snags and pitfalls. Could the fact that I was using a (44.1K) CD stream as input been a prob as JACK was running at 48K? I also had the mic, line in and SPDIF all enabled for capture so another thing I'll have to try later is only having SPDIF capture enabled.</div>
<div><br></div><div>Thanks for your help!</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Tue, Nov 13, 2012 at 2:27 PM, Len Ovens <span dir="ltr"><<a href="mailto:len@ovenwerks.net" target="_blank">len@ovenwerks.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im"><br>
On Tue, November 13, 2012 1:24 am, Dan MacDonald wrote:<br>
> Hi Len!<br>
><br>
</div><div class="im">> Yes, I only see 2 JACK capture ports but 7 or 8 outputs. I don't think I<br>
> need AC3 or even stereo capture (although that would be a plus) to work as<br>
> the real intent is to use this adapter to capture the output of a KORG D16<br>
> multitrack into JACK<br>
><br>
> I dug out my ol' SHARP CD/MD deck to use its optical out for a quick test<br>
> this morning before work. I got rid of the experimental ALSA config, made<br>
> sure that SPDIF In was enabled under ALSA mixer, connected my SHARP,<br>
> started playing a CD and then started JACK but still I only got 2 capture<br>
> ports (mic L and R). I then stopped JACK and fired up Audacity but that<br>
> didn't seem to let me select SPDIF in as a capture source either.<br>
><br>
> I've not tried arecord yet but if I can't get the SPDIF In visible as a<br>
> JACK capture port then the adapter is no use to me.<br>
<br>
</div>Did you check to see if the spdif audio was showing up on the two "mic"<br>
inputs? With either audacity or jack.<br>
<span class="HOEnZb"><font color="#888888"><br>
<br>
--<br>
Len Ovens<br>
<a href="http://www.OvenWerks.net" target="_blank">www.OvenWerks.net</a><br>
<br>
</font></span></blockquote></div><br></div>