<div dir="ltr">Hi James/Len, <br><br>>Did you try 48k / 3 periods/buffer?<br><br>Just got it down to 4ms on the internal card!<br><br>often I'm processing a live and recorded input, which is mixed back with the live performance, so latency is of some importance, but the numbers you are both getting are very workable.<br>
<br>Thanks again for all the info.<br><br>/S<br><br><br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On 27 January 2013 23:26, James Stone <span dir="ltr"><<a href="mailto:jamesmstone@gmail.com" target="_blank">jamesmstone@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="HOEnZb"><div class="h5">On Sun, Jan 27, 2013 at 10:32 PM, Len Ovens <<a href="mailto:len@ovenwerks.net">len@ovenwerks.net</a>> wrote:<br>

><br>
> On Sun, January 27, 2013 12:20 pm, James Stone wrote:<br>
>> On Sun, Jan 27, 2013 at 4:05 PM, Saul Rayson <<a href="mailto:saul@atonic.com">saul@atonic.com</a>> wrote:<br>
><br>
>>>>For live work, Guitar effects, soft synths, etc. USB 1.1 at 16bit/48k<br>
>>>> may<br>
>>>>work just fine<br>
>>><br>
>>> My experience with USB audio is limited, but USB 1 on mac, for live<br>
>>> processing, I have found to have unusable latency.<br>
>>><br>
>><br>
>> Latency in 1.1 vs usb 2 shouldn't be significantly different as I<br>
>> understand it. usb 2 just allows higher bandwidth - so more channels<br>
>> or 24bit vs 16bit. Just depends on whether the interface is properly<br>
>> supported in linux.<br>
><br>
> I have used a USB 1.1 IF on my netbook running at 800Mhz (half speed) and<br>
> was still able to run the IF at -p 64 -n 2 (2.67 ms Latency) without<br>
> xruns. I did have to back the latency off if I ran too many softsynths or<br>
> too many effects, but even double that is not bad. -p 64 with USB 2<br>
> devices seems to be the lowest too. I run into memory problems before CPU<br>
> use problems in general with only 1G memory :)<br>
<br>
</div></div>.. actually on the Scarlett 2i4, I can start jack with -p 16 -n 2..<br>
but it's not really usable on my ageing PC (Athlon 2500XP 1G RAM)..<br>
lots of xruns.. It will run xrun free at 48k with -p32. push it up to<br>
-p64, and it is pretty solidly stable at 96000 sample rate. Note 2.67<br>
is round trip latency - from sound in to sound out. For midi control<br>
of softsynths, it is half that.<br>
<br>
With very short sample sizes, linuxsampler complains that the audio<br>
fragment size is too small though! I think linuxsampler (at least the<br>
version shipped with ubuntu) requires a period of 128 to run<br>
correctly..<br>
<span class="HOEnZb"><font color="#888888"><br>
James<br>
</font></span></blockquote></div><br></div>