<div dir="ltr"><br><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, Feb 14, 2013 at 8:14 AM, Fons Adriaensen <span dir="ltr"><<a href="mailto:fons@linuxaudio.org" target="_blank">fons@linuxaudio.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">On Thu, Feb 14, 2013 at 01:40:23PM +0100, Brendan Jones wrote:<br>
<br>
> Just personal preference, but I think both of these have an<br>
> unacceptable amount of hissing that is not present in the original.<br>
<br>
</div>The original had most of the signal above 2kHz or so almost gone, so<br>
this had to be boosted. Tape hiss gets amplified in the same way (this<br>
was a _casette_ recording). It's probably possible to remove some of<br>
the hiss using an FFT-based multiband expander.<br>
<div class="im"><br></div></blockquote><div><br></div><div>Which is pretty much exactly what I did.  I used WaveARTs MRNoise for this purpose, I have access to Izotope RX2 as well, but given that the signal there is so weak, I didn't use that in a destructive manner, and I am finding I prefer wavearts for primarily high frequency noise.  However since RX2 is a new acquisition for me I am still learning their strengths and weaknesses.<br>
</div><div><br> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">
> Can you explain what you did exactly<br>
<br>
</div>Second order shelf filter, +12 dB or so at 4 kHz and above. There were<br>
some faint traces of signal around 8 kHz, so a very narrow band around<br>
that frequency was boosted a few dB more.<br>
<div class="im HOEnZb"><br></div></blockquote><div><br></div><div>Heh it is very interesting to hear you describe it, as I didn't look at the signal analysis at all when I did mine, but also put in a fairly sharp lowpass filter at 12k as I didn't hear anything usable above that when I boosted.  Now I am curious to go back and try out what you describe as well as look at the statistical analysis and see if it can be improved a bit more or not, I just don't have time these days sadly.  This was a quick 15 minute project or so to see what I could do out of my own curiosity while I had some spare time before a meeting.<br>
</div><div><br></div><div>       Seablade<br></div></div></div></div>