<div dir="ltr"><div><div>Thanks for all of your responses! Enlightening :D<br><br></div>Fons: Thanks for the info! My room is sadly fairly small and cubic (and sounds rather horrible as it is now). The good part though (I think it's good at least..) is that I won't be recording anything that bassy, and my monitors are small. That should at least make the risk of a boomy room a little bit lower, right? I'm planning on building 4-8 absorbtion panels (120 x 60cm, 10cm deep with 5cm thick rock wool) which should help some with the mid/high at least. But if that doesn't turn out good enough, I guess I'll need to look into some fancy DIY solution for the low end (current contender is stuffing the corners from floor to ceiling with rock wool too). That's a bit more labour intensive though, so I'm trying to avoid it...<br>
<br>Any thoughts on that? Am I going about it right/OK, or should I attack this problem some other way?<br><br>Also, thanks for the info about Japa. I've noticed those controls on Japa before but never known what they are for. I'm going to test this right away tomorrow. <br>
<br></div>Thanks again!<br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Jul 23, 2014 at 5:46 PM, Kevin Cosgrove <span dir="ltr"><<a href="mailto:kevinc@cosgroves.us" target="_blank">kevinc@cosgroves.us</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="HOEnZb"><div class="h5"><br>
On 23 July 2014 at 7:52, Gabriel Nordeborn <<a href="mailto:gabbe.nord@gmail.com">gabbe.nord@gmail.com</a>> wrote:<br>
<br>
> Hi!<br>
><br>
> I'm in the midst of trying to treat my room acoustically, and I really want<br>
> to do measurements of my room acoustically. Of course, I know way too<br>
> little about this, and therefore, I need your help as always! ;) (if you<br>
> reply to this e-mail, imagine I'm 5 years old when you explain stuff).<br>
><br>
> So, what I have is this:<br>
><br>
> - A set of studio monitors (Adam A3X)<br>
> - A microphone (Senheiser MK4)<br>
> - A room...<br>
> - My studio computer with Linux<br>
><br>
> What I want to do, roughly, is this:<br>
><br>
> - Through a test tone(? test sound?) measure the frequency "response" of<br>
> the room. I want to get a nice curve, like an equalizer, which tells me<br>
> roughly how my room responds to the different frequencies.<br>
> - I want to do this before and after I apply treatment.<br>
><br>
> So, my question is: How on earth do I do this?! Are there FLOSS tools<br>
> available for this? Is it easy to do something as basic as this?<br>
<br>
</div></div>Try DRC (Digital Room Correction).  <a href="http://drc-fir.sourceforge.net/" target="_blank">http://drc-fir.sourceforge.net/</a><br>
There are scripts to help the measurement.  But, it's not all plug<br>
and play.<br>
<br>
You can also try Room EQ Wizard (REW) <a href="http://www.roomeqwizard.com/" target="_blank">http://www.roomeqwizard.com/</a><br>
Which is free software, but no open source.<br>
<br>
Cheerio...<br>
<br>
--<br>
Kevin<br>
<div class="HOEnZb"><div class="h5"><br>
<br>
_______________________________________________<br>
Linux-audio-user mailing list<br>
<a href="mailto:Linux-audio-user@lists.linuxaudio.org">Linux-audio-user@lists.linuxaudio.org</a><br>
<a href="http://lists.linuxaudio.org/listinfo/linux-audio-user" target="_blank">http://lists.linuxaudio.org/listinfo/linux-audio-user</a><br>
</div></div></blockquote></div><br></div>