<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>The truth is I've never tried to clean the encoders. I will do that. Thanks for the advice.<div><div>I don't know why (maybe the same problem with dust on the encoders?) but sometimes, also the display numbers change without touching anything. The Phantom of the bcr...<div><br></div><div><br><div>> From: ralf.mardorf@rocketmail.com<br>> To: linux-audio-user@lists.linuxaudio.org<br>> Date: Wed, 10 Sep 2014 22:27:52 +0200<br>> Subject: Re: [LAU] [Bulk] Re: control surfaces<br>> <br>> On Wed, 2014-09-10 at 18:49 +0200, Nacho - wrote:<br>> > Also own one BCR-2000 and I do not recommend it. Some of the first row<br>> > knobs now don't work properly on my unit and has never left my room.<br>> > It does not seem a reliable device for me, It is tempting, cheap and<br>> > with all that rotary encoders, but...<br>> <br>> I don't own those Behringer control devices, but all switches (mute, sub<br>> group routing etc.) of my Behringer analog mixer are defect. When unused<br>> the mixer is covered with a plastic sheet and the switches were seldom<br>> used, they get broken 2 or 3 years after I bought it. Non of the faders<br>> suffers from dust, faders and potentiometers are still ok and it's much<br>> older than 3 years now. I didn't test Kontakt 60 to clean, Kontakt WL to<br>> sluice out and Kontakt 61 to lubricate. Btw. using Kontakt 61 aerosol<br>> for faders does avoid fader death after cleaning. The cans lose pressure<br>> very soon, perhaps I should open the cans and spray it with my<br>> airbrush :D. Anyway, did you test cleaning the knobs using cleaning<br>> aerosols and after cleaning it a protection aerosol?<br>> <br>> <br>> _______________________________________________<br>> Linux-audio-user mailing list<br>> Linux-audio-user@lists.linuxaudio.org<br>> http://lists.linuxaudio.org/listinfo/linux-audio-user<br></div></div></div></div> </div></body>
</html>