<div dir="ltr"><br><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Oct 15, 2014 at 1:59 PM, raf <span dir="ltr"><<a href="mailto:rmouneyres@gmail.com" target="_blank">rmouneyres@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><span class="">>> From: Iain Mott <<a href="mailto:mott@reverberant.com">mott@reverberant.com</a>><br>
>> I tried another slot (there are only 2 pci slots on the mother board),<br>
>> but the same thing happens. It required about 3 boots to get the<br>
>> firmware to load. I hope it's not a problem in the RME PCI card itself.<br>
><br>
> You could try checking whether the PCI card is detected in the cases where<br>
> the firmware is not loaded.  It is PCI and not PCIe?<br>
> Compare the output of lspci in the good vs. failing case and verify that<br>
> the PCI card is detected, because the driver will never load and attempt<br>
> to find the external interface if the PCI part of the interface is not<br>
> detected.<br>
<br>
</span>that's a good spot Chris, I tend to have that very same problem from time to time with a HDSP PCI card, i suspect my PCI extender to move in the rack and the card sometimes not being detected at all on startup.<br>
It also mean I have never find a real solution to this because i suspect the hardware, so sometimes i open the rack, move the card, and reboot.<br>
Lain, if you're in the same situation, make sure the card is properly inserted and aligned in the pci slot.<br></blockquote><div><br></div><div>it may or may not apply to you, but this is required reading:<br><br>    <a href="http://www.rme-audio.de/en_support_faq.php?page=content/support/en_hdsp_pci">http://www.rme-audio.de/en_support_faq.php?page=content/support/en_hdsp_pci</a> <br><br></div><div>i just "lost" my HDSP card, which was a rev 3. no idea if it caused by the same problem - it had been working in the same computer for several years.<br></div></div></div></div>