<div dir="ltr">On Sun, Feb 28, 2016 at 4:58 PM, Peter P. <<a href="mailto:peterparker@fastmail.com">peterparker@fastmail.com</a>> wrote:<br>> > [251636.327240] pci 0000:05:00.0: [10ee:3fc5] type 00 class 0x040100<br>> > [251636.327280] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]<br>> > [251636.327491] pci 0000:05:00.0: supports D1 D2<br>> > [251636.327496] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot<br>> > [251636.335144] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff] [251636.335176] pci 0000:05:00.0: no hotplug settings from platform<br>> > [251636.335274] cannot find the slot for index 1 (range 0-29), error: -16<br>> > [251636.335283] snd_hdsp: probe of 0000:05:00.0 failed with error -16<br><br><br>Seems related:<br><a href="http://alsa-devel.alsa-project.narkive.com/9vepYUEw/rme-multiface-i-pccard-error-12">http://alsa-devel.alsa-project.narkive.com/9vepYUEw/rme-multiface-i-pccard-error-12</a><br><br>What is the output of    cat /proc/asound/cards  ?<br><br><br>> > and the red LED on the Audio interface (which indicates an error) stays lit.<br><br>It indicates there is no host connected - almost the same but not quite,<br>because the device keeps running standalone if the host is disconnected.<br><br>-Harry<br><br>--<br><br><a href="http://www.openavproductions.com">http://www.openavproductions.com</a></div>