<div dir="ltr">Could anyone working with the MOTU ultralite confirm that they have routing from analog inputs to the computer working? I can see signal showing up in the routing matrix and device page, and the device shows up as intended with 18 channels of input in JACK / ALSA, but I don't get any signal, even though I routed 6 analog input channels to "To Computer 1" through "To Compute 6". Really puzzled ... everything suggests that this should just work....<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Jul 23, 2017 at 6:26 AM, Anders Hellquist <span dir="ltr"><<a href="mailto:lau@hellquist.net" target="_blank">lau@hellquist.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">The linked product is a rj45 splitter that is very usable for running two Ethernet connections thru a single cable but you need one of these at both endpoints and this has nothing to do with my use case. I know that a switch is the solution and was only stating the limitation gnu Linux users will face because of the missing control link.<div dir="auto"><br></div><div dir="auto">I am quite happy with the product and I usually only need one card connected to my laptop and the things are just great as for the rest of gnu AVB users. It was only a heads up for the issue.</div><div dir="auto"><br></div><div dir="auto">I hope that we in the future will have access without need for the AVB switch, both for cost effectiveness and reduced complexity.</div><span class="HOEnZb"><font color="#888888"><div dir="auto"><br></div><div dir="auto">/Anders</div></font></span></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Jul 23, 2017 01:49,  <<a href="mailto:list@contacte.xyz" target="_blank">list@contacte.xyz</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello.<br>
<br>
For me there is no confusion here.<br>
<br>
Motu AVB's cards serie is not - officially - supported by MOTU for Gnu/Linux. Even without the «Linux» stamp on it from MOTU it's the more advanced card you can control without headache under Gnu/Linux.<br>
<br>
The feature you talk about is for proprietary Operating system with Motu's drivers - with some limitations.<br>
<br>
Either you bought the wrong cards, or using the wrong operating system for your need - it's only a guess.<br>
<br>
The AVB switch *is* your solution.<br>
<br>
Or you can try, the kernel module something like : CONFIG_USB_NET_* and try different devices under to see if your log show something when you plug any of your MOTU cards...<br>
<br>
Or you can try something like this :<br>
<br>
<a href="http://i2.cdscdn.com/pdt2/5/2/2/1/700x700/auc3548389018522/rw/doubleur-de-port-rj-45-blinde.jpg" rel="noreferrer" target="_blank">http://i2.cdscdn.com/pdt2/5/2/<wbr>2/1/700x700/auc3548389018522/r<wbr>w/doubleur-de-port-rj-45-blind<wbr>e.jpg</a><br>
<br>
sorry don't know the name in English...<br>
<br>
Let us know the result....<br>
<br>
<br>
<br>
<br>
<br>
All the best.<br>
<br>
<br>
<br>
<br>
<br>
On 2017-07-23 00:20, Anders Hellquist wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
There is confusion for sure.<br>
<br>
if I link my two Motu ultralite AVB cards together by using the two<br>
AVB ethernet sockets and a Cat5 or Cat6 cable. I have used all<br>
ethernet connectors available and the AVB devices can talk to each<br>
other but no other networking is available. If I point a browser to<br>
any of the ip's of those boxes i will not get an answer since there is<br>
no possible route to those cards that only have a link between them.<br>
The cards have no built in wifi or extra ethernet jack.. How could I<br>
possibly connect to them except by usb and Class Compliant Audio<br>
connection which does not give me the extra IP over USB that the<br>
windows/osx driver provides...<br>
<br>
I have never said anything about AVB over USB but only mentioned the<br>
missing linux link which is the possibility to access the http web gui<br>
trough the USB (or for cards with Thunderbolt) driver provided ip-link<br>
(for control only)<br>
<br>
As I tried to explain. Linux users must have a AVB compliant switch to<br>
get a network link to be able to manage Linked AVB devices OR have<br>
windows/osx boxes connected via USB/Thunderbolt to one of the AVB<br>
devices.<br>
<br>
Trust me, I am not confused but only stating the obvious that linking<br>
to cards with just a cable will create an isolated AVB cluster that<br>
will not be manageable from linux computers until someone figures out<br>
how to write a driver to get the IP-over USB passthru to work.<br>
<br>
/Anders<br>
</blockquote>
<br>
</blockquote></div></div>
</div></div></blockquote></div><br></div>