[Jack-Devel] mips revisited

[Stéphane Letz]

The error message is clear "Driver is not running »  : try to start in verbose mode (-v on command line)

Stéphane

> Le 17 avr. 2016 à 15:28, Matt Flax <flatmax at flatmax.org> a écrit :
> 
> Hi there,
> 
> I have revisited running jackd (2) on a limited resource mips.
> Managed to start it running now. Had to limit the number of ports and alter the postpacked structure alignment in a similar manner for the __arm__.
> 
> It starts and runs :
> jackd -p 16 -d alsa -p 256 -i2 -o2
> creating alsa driver ... hw:0|hw:0|256|2|48000|2|2|nomon|swmeter|-|32bit
> 
> This is great !
> 
> However, if I login to the system and try to run anything - the client fails like so ... whilst jackd keeps running ...
> 
> The jackd thread reports :
> 
> JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Operation timed out
> Driver is not running
> Cannot create new client
> CheckSize error size = 32 Size() = 12
> CheckRead error
> CheckSize error size = -1 Size() = 4
> CheckRead error
> CheckSize error size = 0 Size() = 12
> CheckRead error
> 
> 
> 
> jack_samplerate thread reports :
> 
> # jack_samplerate
> Cannot read socket fd = 5 err = No error information
> CheckRes error
> JackSocketClientChannel read fail
> Cannot open jack_samplerate client
> JackShmReadWritePtr1::~JackShmReadWritePtr1 - Init not done for -1, skipping unlock
> JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
> JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
> JACK server not running?
> 
> and ideas ?
> 
> thanks
> Matt
> 
> _______________________________________________
> Jack-Devel mailing list
> Jack-Devel at lists.jackaudio.org
> http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org