[linux-audio-dev] RME Hammerfall DSP Cardbus+Multiface

[Mark Knecht]

Paul,
   Great info. I didn't know about modinfo. Is there a way to query what the
current setting of these parameters are? It seems that I'm told I have a
range to work in, like 1-8, but no indication of how they are currently set
or what they do. (Maybe only read the code?)

   I'm sure that many are just on/off sorts of things, but some clearly are
not.

Mark

-----Original Message-----
From: linux-audio-dev-admin at music.columbia.edu
[mailto:linux-audio-dev-admin at music.columbia.edu]On Behalf Of Paul Davis
Sent: Thursday, December 19, 2002 6:21 AM
To: linux-audio-dev at music.columbia.edu
Cc: Alsa-List
Subject: Re: [linux-audio-dev] RME Hammerfall DSP Cardbus+Multiface


>dsen,
>   Hi. I'm messing with similar things this evening. (And not doing
>great, but not failing either.) I'm using a HDAP 9652, not the
>Multiface, but it's the same driver I believe. The difference is I have
>no 'headphone output'. Just 26 outputs.
>
>   I'm in KDE. Inside of a Konquerer window, I have set the file
>associations for wav and x-wave to be
>
>aplay -device="plughw"
>

actually, i doubt that this is the issue at all. the hdsp driver has a
module option:

       snd_line_outs_monitor

(possibly changed in recent versions to just "line_outs_monitor"). if
set to a non-zero value, all other outputs will be monitored on the
headphone/line out channels. you can find out about module options
using the modinfo command. for example:

 % modinfo snd-hdsp

filename:    /lib/modules/2.4.19/kernel/sound/pci/rme9652/snd-hdsp.o
description: "RME Hammerfall DSP"
author:      "Paul Davis <pbd at op.net>"
license:     "GPL"
parm:        snd_index int array (min = 1, max = 8), description "Index
value for RME Hammerfall DSP interface."
parm:        snd_id string array (min = 1, max = 8), description "ID string
for RME Hammerfall DSP interface."
parm:        snd_enable int array (min = 1, max = 8), description
"Enable/disable specific Hammerfall DSP soundcards."
parm:        snd_precise_ptr int array (min = 1, max = 8), description
"Enable precise pointer (doesn't work reliably)."
parm:        snd_line_outs_monitor int array (min = 1, max = 8), description
"Send all input and playback streams to line outs by default."
parm:        snd_force_firmware int array (min = 1, max = 8), description
"Force a reload of the I/O box firmware"

the parameter defaults to zero, so by default, you hear nothing.

there is no way to use any existing linux audio mixer to control
*what* you hear - the hdsp has 1542 mixer controls arranged in a
matrix, and its just not possible to make sense of this with mixers
designed around a few channels with direct routing. work is proceeding
on an equivalent to RME's TotalMix to offer ways of controlling this.

--p