[linux-audio-dev] Still on usx2y

[Antonio "Willy" Malara]

Rui Nuno Capela ha scritto:

> (N is the soundcard index, probably 0 in your case, but not sure; check it
> out from the /proc/asound/cards info) then starting jackd, use the
> "hw:N,2" device name instead of just "hw:N" (the later should work too,
> but that's about using the regular alsa interface not the usx2y specific
> one).
> 
> Good luck :)

uhm.. seems i dont have hw:0,2.. here's what i got

Zeryn:/home/willy/jack-0.99.44.11cvs# modinfo snd-usb-usx2y
filename: 
/lib/modules/2.6.10-mm3/kernel/sound/usb/usx2y/snd-usb-usx2y.ko
author:         Karsten Wiese <annabellesgarden at yahoo.de>
description:    TASCAM US-X2Y Version 0.8.7.1
license:        GPL
parm:           index:Index value for US-X2Y.
parm:           id:ID string for US-X2Y.
parm:           enable:Enable US-X2Y.
parm:           nrpacks:Number of packets per URB.
vermagic:       2.6.10-mm3 preempt gcc-3.3
depends:        snd-usb-lib,snd-page-alloc,snd-pcm,snd,snd-hwdep
alias:          usb:v1604p8001dl*dh*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1604p8007dl*dh*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1604p8005dl*dh*dc*dsc*dp*ic*isc*ip*
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.8rc2 (Wed Jan 05 
06:44:40 2005 UTC).
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/cards
0 [USX2Y          ]: USB US-X2Y - TASCAM US-X2Y
                      TASCAM US-X2Y (1604:8007 if 0 at 001/003)
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/pcm
00-00: US-X2Y Audio : US-X2Y Audio #0 : playback 1 : capture 1
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/hwdep
00-00: /proc/bus/usb/001/003
Zeryn:/home/willy/jack-0.99.44.11cvs#

Zeryn:/home/willy/jack-0.99.44.11cvs# jackd -v -d usx2y -d hw:0,2
getting driver descriptor from /usr/local/lib/jack/jack_alsa.so
getting driver descriptor from /usr/local/lib/jack/jack_dummy.so
getting driver descriptor from /usr/local/lib/jack/jack_oss.so
getting driver descriptor from /usr/local/lib/jack/jack_usx2y.so
jackd 0.99.44.11cvs
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
server `default' registered
loading driver ..
experimental alsa driver ... 
hw:0,2|hw:0,2|1024|2|48000|0|0|nomon|swmeter|-|32bit
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D2p failed: 
No such device
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D2c failed: 
No such device
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to 
capture-only mode
cannot load driver module usx2y
registered builtin port type 32 bit float mono audio
Delay       Count
-----   ---------
 >1000           0
-----   ---------
Total           0
new client: alsa_pcm, id = 1 type 1 @ 0x100216a8 fd = -1
starting server engine shutdown
freeing shared port segments
stopping server thread
last xrun delay: 0.000 usecs
max delay reported by backend: 0.000 usecs
freeing engine shared memory
max usecs: 0.000, engine deleted
no message buffer overruns
cleaning up shared memory
cleaning up files
unregistering server `default'
Zeryn:/home/willy/jack-0.99.44.11cvs#


wil
---
Il jazz e' lasciare che la luce brilli, lasciarla essere.
		-- Keith Jarrett