[linux-audio-dev] emu10k1 questions

[Garett Shulman]

Lee, Thanks for your suggestion. The output I posted to the last email 
was done with:
alsa-driver-1.0.9b
alsa-lib-1.0.9
alsa-utils-1.0.9a
Does the development release, 1.0.10rc1, correct those Unknowns? Also, 
any info you can provide regarding my interpretation of the following is 
greatly appreciated, particularaly my interpretation of the numbers in 
/proc/asound/devices.
Is subdevice: [card- device]: correct? Basically, I want capture the 
output of the wavetable synth (which I believe can only be captured on 
the output side of the 8010 FX) with ecasound. So, would I use hw0,3,19? 
hw0,2,18? Something like that?
 4: [0- 0]: hardware dependent
 8: [0- 0]: raw midi
19: [0- 3]: digital audio playback    This is digital mixer output?
18: [0- 2]: digital audio playback    This is Synth or FX output?
26: [0- 2]: digital audio capture       FX capture?
25: [0- 1]: digital audio capture       Device 1?
16: [0- 0]: digital audio playback    Is this the codec playback?
24: [0- 0]: digital audio capture      Is this the codec capture?
 0: [0- 0]: ctl
 1:       : sequencer
 6: [0- 2]: hardware dependent
 9: [0- 1]: raw midi
10: [0- 2]: raw midi   Which midi devices are which?
Thanks! -Garett

Lee Revell wrote:

>On Tue, 2005-09-20 at 14:01 -0600, Garett Shulman wrote:
>  
>
>>card 0: Live [SB Live [Unknown]]
>>    
>>
>
>First, upgrade to the latest ALSA release if possible.  You seem to be
>hitting a well known bug in the emu10k1 driver recently where it started
>listing previously working devices as "Unknown".
>
>Lee
>  
>