[LAD] [PD-announce] smeck (6ch guitar processing patch) released]

[victor]

I got my pins all wrong. What you have, apparently is a 24-pin connector, 
for which you
can get schematics here: http://www.joness.com/gr300/24pin.htm
>From there I guess you can either wire your own splitters or get a 24-13 pin 
connector
(the modern one we all have today), like this one:
http://www.joness.com/gr300/bc13_S.htm which by the way I'm not sure you can 
find
anymore. But I guess there might be other things out there.

Then you can fork out for one of these, made by RMC (the people who make the 
pickups
on my lovely Godin) : http://www.rmcpickup.com/fanoutbox.html
 or wire your own output splitter.

HTH

Victor

----- Original Message ----- 
From: "victor" <Victor.Lazzarini at nuim.ie>
To: "Albert Graef" <Dr.Graef at t-online.de>; "The Linux Audio Developers' 
Mailing List" <linux-audio-dev at lists.linuxaudio.org>
Sent: Tuesday, August 25, 2009 8:19 PM
Subject: Re: [LAD] [PD-announce] smeck (6ch guitar processing patch) 
released]


> Do you mean hexaphonic? Does it use the 'old' GR roland connector?
> I saw somewhere you could get a converter from that (19-pin?) to the
> modern (12-pin?) connector, which can either be split or you can buy
> a rather expensive box to get 6 outs. I'll try to find where that was.
>
> I've got a lovely Godin with hex out and I am trying to find a friend who
> is good with soldering to make a split cable for me (no luck yet...).
>
> Victor
>
>
> ----- Original Message ----- 
> From: "Albert Graef" <Dr.Graef at t-online.de>
> To: <linux-audio-dev at lists.linuxaudio.org>
> Sent: Tuesday, August 25, 2009 7:59 PM
> Subject: Re: [LAD] [PD-announce] smeck (6ch guitar processing patch)
> released]
>
>
>> Frank Barknecht wrote:
>>> It does pitch detection inside of Pd to tune the transformations to the
>>> pitch
>>> played, so you still get a bit of latency (pitch detection is made on
>>> blocks of
>>> 1024 samples afaik.)
>>
>> Hmm, 20 msecs at 48KHz doesn't sound too bad. The earliest pitch
>> trackers on MIDI guitars had some 250 msecs latency IIRC, now those are
>> a real challenge to play. ;-) (Robert Fripp did it, though.)
>>
>> I actually have one of those hexagonal pickups (a Korg ZD3) retrofitted
>> on a Fender Stratocaster, but it uses a custom interface. Does anyone
>> here know how to extract the six individual audio signals from these?
>>
>> Albert
>>
>> -- 
>> Dr. Albert Gr"af
>> Dept. of Music-Informatics, University of Mainz, Germany
>> Email:  Dr.Graef at t-online.de, ag at muwiinfa.geschichte.uni-mainz.de
>> WWW:    http://www.musikinformatik.uni-mainz.de/ag
>> _______________________________________________
>> Linux-audio-dev mailing list
>> Linux-audio-dev at lists.linuxaudio.org
>> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
>
> _______________________________________________
> Linux-audio-dev mailing list
> Linux-audio-dev at lists.linuxaudio.org
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev