<div dir="ltr">Hi Manuel,<div><br></div><div>It looks like those ES-8's have ADAT I/O.  Could you sync their internal clocks by daisy chaining them via ADAT I/O off of the RME's ADAT output?</div><div><br></div><div>- Mike</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Nov 11, 2019 at 2:43 PM Len Ovens <<a href="mailto:len@ovenwerks.net">len@ovenwerks.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Mon, 11 Nov 2019, <a href="mailto:lacuna_@gmx.net" target="_blank">lacuna_@gmx.net</a> wrote:<br>
<br>
>  I'd like to run up to nine soundcards with Jack.<br>
<br>
nope, won't happen.<br>
<br>
> Eight times Expert Sleepers ES-8 via USB<br>
<br>
USB in particular will not be in sync.<br>
<br>
To use them together and see the i/o on jack will require an extrenal <br>
client or two per usb device. You could use zita-ajbridge to do that which <br>
inserts an SRC stage between the device and jack to make syncing possible. <br>
However, you say you want to use 8 of them. This will also be a problem at <br>
any low latency because you will be using USB hubs which have been known <br>
to cause trouble with audio devices. so be prepared for xruns at any <br>
buffer size less than 1024 (maybe even there).<br>
<br>
> and one RME Madi HDSPe card on a PCIe slot.<br>
<br>
Use that as your jack master.<br>
> <br>
> In Linux at 96 kilobauds.<br>
<br>
kilobauds? you mean sample rate maybe? Use 48000 and be happy, 96000 is <br>
only good for recording bats<br>
<br>
<br>
Really, I don't know how many i/o you RME Madi has (should be 64-ish?) Add <br>
what is needed to max that out. USB mics are for the most part toys, <br>
better to use one of the many 18 i/o USB devices out there instead most of <br>
which do have the ability to sync with your RME.<br>
<br>
I would not waste my time with USB mics.<br>
<br>
--<br>
Len Ovens<br>
<a href="http://www.ovenwerks.net" rel="noreferrer" target="_blank">www.ovenwerks.net</a><br>
_______________________________________________<br>
Linux-audio-dev mailing list<br>
<a href="mailto:Linux-audio-dev@lists.linuxaudio.org" target="_blank">Linux-audio-dev@lists.linuxaudio.org</a><br>
<a href="https://lists.linuxaudio.org/listinfo/linux-audio-dev" rel="noreferrer" target="_blank">https://lists.linuxaudio.org/listinfo/linux-audio-dev</a><br>
</blockquote></div>