[linux-audio-user] Fwd: Please test my MidiSport firmware loader

Clemens Ladisch clemens at ladisch.de
Fri Nov 15 12:15:01 EST 2002


Michal Seta wrote:
> Clemens Ladisch <clemens at ladisch.de> wrote:
> > > Aconnect don`t show me any new midiports.
> >
> > It should.
>
> I have the same problem...
>
> Nov 15 09:35:38 komar kernel: hub.c: USB new device connect on bus1/1, assigned device number 7
> Nov 15 09:35:38 komar kernel: usb.c: USB device 7 (vend/prod 0x763/0x1001) is not claimed by any active driver.
> Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Setup midisport_fw for USB product 763/1001/1
> Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Module setup midisport_fw for USB product 763/1001/1
> Nov 15 09:35:38 komar /etc/hotplug/usb/midisport_fw: load /usr/share/usb/MidiSport2x2.ihx for 763/1001/1 to /proc/bus/usb/001/007

These messages are fine so far, but there should be more.

Please try to run the download utility manually:

	/sbin/fxload -s /usr/share/usb/MidiSportLoader.ihx -I /usr/share/usb/MidiSport2x2.ihx

too see if there are any error messages.

If the download was successful, the product ID should change from 0x1001
to 0x1002, i.e. /proc/bus/usb/devices should contain the line:
	P:  Vendor=0763 ProdID=1002 Rev= 1.21

> And I've got snd-usb-audio loaded but I had to do it manually.
> ... alsa from cvs

snd-usb-audio should be loaded automatically. Please check that
/lib/modules/(version)/modules.usbmap contains a line with these numbers:
	snd-usb-audio ... 0x0763  0x1002 ...
If not, the ALSA drivers aren't installed correctly.


HTH
Clemens




More information about the Linux-audio-user mailing list