[linux-audio-user] rme9632 status?

Mark Knecht mknecht at controlnet.com
Mon Dec 22 09:58:07 EST 2003


WR,
   Hi. The info below seems inconsistent. It appears that you have a
Hammerfall card (either 9652 or 9636) and not the HDSP 9632. from the lspci
results. Is this the case?

   If so, you should be loading the driver for the Hammerfall (snd-rme9652)
and not the driver for the HDSP family. (snd-hdsp)

Mark

> -----Original Message-----
> From: linux-audio-user-bounces at music.columbia.edu
> [mailto:linux-audio-user-bounces at music.columbia.edu]On Behalf Of WR
> Sent: Sunday, December 21, 2003 2:38 AM
> To: linux-audio-user at music.columbia.edu
> Subject: [linux-audio-user] rme9632 status?
>
>
> Spent the last few hours reading threads about hdsp firmware and issues,
> and I'm wondering where things are currently at (development seems to
> happen pretty rapidly around here!)...just installed a 9632 rev3, with
> alsa-driver 1.0.0-rc2, and have some way to go, I reckon...
>
> lspci shows:
> 00:09.0 Multimedia audio controller: Xilinx Corporation RME Digi9652
> (Hammerfall) (rev 03)
>
> dmesg:
> RME Hammerfall-DSP: no cards found
>
> # uname -a
> Linux 2.4.22-ck2 #1 SMP Sun Dec 21 00:23:34 PST 2003 i686 AMD Athlon(tm)
> MP Processor 1900+ AuthenticAMD GNU/Linux
>
> What are the currently recommended kernel/alsa/firmware/eprom versions?
>
> alsa-project.org appears to recommend using the hdsp driver instead of
> rme9652 on the 9632 -- is there any reason to use one or the other? Or am
> I reading it wrong...
>
> Thanks for any advice!!
> WR
>
>
>





More information about the Linux-audio-user mailing list