[linux-audio-user] audiophile 2496 - spdif in

wes schreiner wes at infosink.com
Fri Oct 10 05:26:00 EDT 2003


Clemens Ladisch wrote:

>wes schreiner wrote:
>  
>
>>The support for using lspci/setpci is in all 2.4.x kernels I think, but
>>it doesn't always do what you want. I have a Zoran 36057 video capture
>>device sitting on IRQ 10, same as my sound card. IRQ 9 is unused (no
>>ACPI), so I just tried "setpci -v -s 03:09.0 INTERRUPT_LINE=09" to
>>change its IRQ. lspci -v still says it is at IRQ 10, but lspci -b -v
>>says it is at IRQ 9. Which is it? OK, I modprobe zr36067 and the module
>>loads, and now both lspci -v and lspci -v -b agree that the Zoran chip
>>is at IRQ 10, so nothing changed.
>>    
>>
>
>The interrupt_line register doesn't affect the card in any way, it's
>there for information purposes only. The BIOS sets this register so
>that drivers know which interrupt to use.
>
>To change the interrupt routing, you have to reprogram some registers
>of the PCI controller (starting at 60h in Intel's ICHx southbridges
>IIRC, but read Intel's datasheet first). And I don't know if the
>kernel is able to realize that the interrupt has changed.
>
>
>HTH
>Clemens
>  
>

Well there we go, so it's back to juggling cards in PCI slots and 
switching motherboards. I can report that irqtune does indeed change the 
interrupt priority though, using kernel 2.4.21. That might help someone.

wes




More information about the Linux-audio-user mailing list