[linux-audio-user] rme hamerfall setup - pd hangs then quits was UPDATE insmod errors - rme hammerfall multiface UPDATE

[Fernando Pablo Lopez-Lezcano]

> hi and thanks for the help so far!,

Sure....

> the hdsp module is loaded /sbin/lsmod:
> snd-hdsp               46732   0 (autoclean)
> 
> cat /proc/asound/cards
> 0 [default        ]: H-DSP - Hammerfall DSP
>                      RME Hammerfall DSP + Multiface at 0xfeae0000, irq 5
> 
> the motherboards intel sound chip has now disappeared but thats ok...

It is possible to change /etc/modules.conf so that both drivers are
loaded...

> i ran alsaconf again and now and everything seems a lot healthier
> the hdsploader works (the red Host light is now off) as does hdspconf and hdspmixer
> 
> so everything looks fine but when i start pd it hangs for about 20 seconds and 
> then outputs the following errors, then quits.

Try "pd -jack" to start it with audio directed to the Jack server. It is
using the default which is ALSA, and ALSA is not available because it is
being used by Jack :-)

-- Fernando