[linux-audio-user] Delta 1010 Configuration
Fernando Pablo Lopez-Lezcano
nando at ccrma.Stanford.EDU
Sat Jul 3 17:43:43 EDT 2004
[sorry for the delay in answering...]
> I'm looking at getting an M-Audio Delta 1010 for the
> music workstation I'm building and have a few questions
> about supporting hard/software requirements. Does the
> 1010 route all ten inputs discretely into the PCI
> interface such that there is no need for a hardware
> mixer to process the inputs? If so, what software
> provides the best alternative to an eight channel
> mixer? Are the outputs assignable or are they tied to
> their respective inputs? What other hardware do I need
> aside from input sources, cables, balanced to 1/4" TIP
> adapters, amplifier(s) and speakers to handle 8 channel
> recording/playback?
I'm not sure if I undertand the question. The 1010 has 8 analog
inputs/outputs plus spdif. There is an internal (in the chipset) digital
mixer that can be used to do a mixdown to stereo. There is a digital
patchbay that defines what goes to the outputs, you can select any input
or spdif channel and the outputs of the internal mixer (channels 1/3/5/7
can get the left, 2/4/6/8 the right).
The app to use to control all this is envy24control and is part of the
alsa-tools package.
-- Fernando
More information about the Linux-audio-user
mailing list