[linux-audio-user] Midisport 8x8 - firmware not loading; is my guess

Marije Baalman lists at nescivi.de
Sun Nov 14 15:59:44 EST 2004


Hi,

I had a similar problem with the MidiSport 2x2
I discovered that doing a reboot somehow gets the thing working (the
usb-LED on the device starts burning during the boot, and the device
runs fine afterwards).
I do not know why though.

sincerely,
Marije


Sunday, November 14, 2004, 9:42:54 PM, you wrote:

BF> I asked this question on the ALSA user's list with no response (yet!)
BF> Thought maybe someone on this group may have come across this.

BF> Can't get midisport8x8 to work. I think that the firmware is not loading.
BF> Some notes:
BF> ---
BF> I have usbfs running (the dir is there), installed the hotplug and
BF> fxload packages from linux-hotplug and "make install" the 
BF> midisport_firmware-0.5.

BF> ---
BF> modprobe:
BF> ================================
BF> # --- ALSA configuration
BF> alias char-major-116 snd
BF> alias char-major-14 soundcore
BF> alias snd-card-0 snd-ice1712
BF> alias snd-card-1 snd-usb-audio

BF> # OSS/Free portion
BF> alias sound-slot-0 snd-card-0
BF>   # card #1 (Delta 66)
BF> alias sound-service-0-0 snd-mixer-oss
BF> alias sound-service-0-1 snd-seq-oss
BF> alias sound-service-0-3 snd-pcm-oss
BF> alias sound-service-0-8 snd-seq-oss
BF> alias sound-service-0-12 snd-pcm-oss

BF> # card #2 (midipsort 8x8)
BF> alias sound-slot-1 snd-card-1
BF> ================================

BF> ---
BF> cat  /proc/asound/cards shows just my Delta66 card.

BF> ---
BF> cat /proc/bus/usb/devices  shows just info on the two USB controllers
BF> (as does lsusb)

BF> ---
BF> lsmod (relevant)"
BF> =====================================
BF> Module                  Size  Used by
BF> snd_pcm_oss            54312  0
BF> snd_mixer_oss          18432  2 snd_pcm_oss
BF> realcap                 4240  0
BF> commoncap               4736  1 realcap
BF> snd_seq                50576  8
BF> snd_usb_audio          67680  0
BF> snd_ice1712            63688  5
BF> snd_ice17xx_ak4xxx      4224  1 snd_ice1712
BF> snd_pcm                85128  5
BF> snd_pcm_oss,snd_usb_audio,snd_ice1712
BF> snd_page_alloc         11016  1 snd_pcm
BF> snd_timer              23684  2 snd_seq,snd_pcm
BF> snd_ak4xxx_adda         5760  2 snd_ice1712,snd_ice17xx_ak4xxx
BF> snd_cs8427             10880  1 snd_ice1712
BF> snd_ac97_codec         63748  1 snd_ice1712
BF> snd_i2c                 5248  2 snd_ice1712,snd_cs8427
BF> snd_mpu401_uart         7680  1 snd_ice1712
BF> snd_rawmidi            23076  2 snd_usb_audio,snd_mpu401_uart
BF> snd_seq_device          8200  2 snd_seq,snd_rawmidi
BF> snd                    54532  23 
BF> snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_ice1712,snd_ice17xx_ak4xxx,snd_pcm,snd_timer,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device

BF> soundcore               6496  2 snd

BF> =====================================

BF> Midisport does not show up anywhere. So, I fear that fxload and/or
BF> hotplug scripts are not working.

BF> How can I check this? And, how can I enable these to work (if this is
BF> the problem)?

BF> thanks much!

BF> brad




-- 




More information about the Linux-audio-user mailing list