[linux-audio-user] USX2Y rawusb mode

[Spencer Russell]

On Sat, Mar 05, 2005 at 12:25:13PM +0100, Karsten Wiese wrote:
> Am Samstag 05 M?rz 2005 09:20 schrieb Spencer Russell:
> > OK, So as per these several suggestions, I've now tried the US428
> > with a vanilla 2.6.11, a 2.6.11 with Ingo's preempt patch and
> > full preemption, nrpacks=4, apm and acpi not compiled in the
> > kernel, and without my usb ethernet card plugged in. I'm still
> > getting the "Sequence Error!" messages, then a couple seconds
> > later qjackctl dissapears.
> 
> Please post the output of
> 	$cat /proc/interrupts
> maybe the usb-interrupt is also busy with something else...
> 

srussell at slingshot:~$ cat /proc/interrupts
           CPU0       
  0:   23968893          XT-PIC  timer  0/68893
  1:       5085          XT-PIC  i8042  0/5085
  2:          0          XT-PIC  cascade  0/0
  7:          0          XT-PIC  parport0  0/0
  8:          3          XT-PIC  rtc  0/3
 10:          0          XT-PIC  VIA686A  0/0
 11:    9538103          XT-PIC  yenta, uhci_hcd  0/38103
 12:      36200          XT-PIC  i8042  0/36200
 14:     101724          XT-PIC  ide0  0/1723
 15:         13          XT-PIC  ide1  1/12
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0


Hmm, it does look like my PCMCIA driver is also on the same
interrupt. I don't have any PCMCIA cards in now, but could that
still be causing problems?

> Also make shure that any option in your bios sounding like "usb
> legacy support" is disabled.
> 

I have kind of a strange BIOS, where pretty much the only option
I have when I go into the setup is boot order, there isn't
anything about USB support.

Thanks for the help,
Spencer