[linux-audio-user] Splitting while recording

[Robert Jonsson]

On Monday 21 Mar 2005 22:54, Dubphil wrote:
> On Mon, Mar 21, 2005 at 08:35:19PM +0100, Robert Jonsson wrote:
> > Was it the Input or the Track meter that you checked?
>
> I checked both the input and the track meter.

Ok, that is wierd. I tested now with jack_metro as signal source and it seems 
to match perfectly at 0db.

>
> > The track meter by
> > default shows the output of the track. To see the real level going into
> > the track either check the input meter or click the [pre] button.
>
> So if the fact of pressing the [Pre] button and check the level of the
> track is equivalent to check the level of the input.
>
> Perhaps there is a difference on the level graduation I mean the yellow
> and red zones between MuSE and Rezound...

I think the limits are normally -1.0 - +1.0, this is where RED starts.
>
> Is there any standard about those green yellow and red zones on a vu
> meter ? Or each developpers choose the way he will manage this ?

Somebody mentioned a standard long ago, don't know what it was, probably every 
implementation is different ;). I'd think that red means overload for most 
though.

Regards,
Robert

>
> Regards
>
> Philippe

-- 
http://spamatica.se/musicsite/