[linux-audio-user] BCA2000 behringer alsa support

[Joe Hartley]

On Thu, 13 Oct 2005 19:58:01 +0200
Lazzaro Nicolò Ciccolella <ciccolix at tiscalinet.it> wrote:

> I am not able to configure the bca2000 under linux.
> 
> Although I loaded the module "snd-usb-audio" the only card that comes 
> seen is the intel motherboard integrated card.

The BCA isn't listed with lsusb, so it hasn't been seen by the system.
Have you power-cycled it after Linux has booted?  I find I have to do
that pretty frequently, usually just after I start jack.

I don't know what application you want to use the BCA with, but the
Wiki entry at http://ardour.org/manual/using_a_bcf2000 has some helpful
hints on connecting a BCF/BCA even if you're not using Ardour.

-- 
======================================================================
       Joe Hartley - UNIX/network Consultant - jh at brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa