[linux-audio-user] M-Audio Fast Track Pro setup

[Lee Revell]

On Thu, 2006-08-17 at 22:37 +0200, Mathias Friman wrote:
> I can play sound for the Phones-output jack through Audacity with
> PortAudio v19 using both (hw:1,0) and (hw:1,1)
> but i cannot do:
> 
> aplay -D hw:1,0 test.wav or
> aplay -D hw:1,1 test.wav
> 
> because it outputs:
> 
> Plays WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz,
> Mono
> aplay: set_params:901: Channels count not available 

Use plughw:x,x, not hw:x,x.  Probably the device does not support mono
natively.

If this fails, post the output of "aplay -v -D plughw:1,0 test.wav" etc.

Lee