[linux-audio-user] RME Digi9652 with Alsa

Paul Davis paul at linuxaudiosystems.com
Tue Feb 28 08:10:32 EST 2006


On Tue, 2006-02-28 at 16:04 +1100, Jason White wrote:
> On Mon, Feb 27, 2006 at 09:17:54AM -0500, Paul Davis wrote:
>  
> > aplay -D plughw:1,0 file.wav
> > 
> > this will actually put the output across all outputs, but it should
> > accomplish most of what you want. 
> 
> Aplay ran without any error messages but there was no output produced. I set
> all of the channels to "on", and also tried enabling the "pass-thru" option
> but none of this had any audible effect. Whenever I ran aplay again, the
> channels ("punch status" in the /proc/asound/card1/rme9652 file) were somehow
> reset to "off".

punch status is 100% irrelevant here - it should be off. if turned on
for a given channel, it means that the channel's input will stream be
copied to its output stream. pass-thru should also not be used, since it
basically turns on this behaviour for every channel.

> An example of /proc/asound/card1/rme9652 appears below.

> ADAT Sample rate: 44100Hz
> ADAT1: No Lock
> ADAT2: No Lock
> ADAT3: No Lock

this suggests that you do not have correct connections established. at
least one of these should say "Lock" or "Sync". what is the interface
connected to, and how is clocking being handled?






More information about the Linux-audio-user mailing list