[linux-audio-user] Debian 2.6.14 alsa problems
cave.dnb at tiscali.fr
Thu Jan 5 18:50:44 EST 2006
On Thursday 05 January 2006 21:49, Laura Conrad wrote:
> >>>>> "NH" == Nigel Henry <cave.dnb at tiscali.fr> writes:
> NH> Hi Laura. I may be going down the wrong road here, but it appears
> you have 2 NH> cards. The one on the MOBO, and the Creative one.
> NH> Do you have them both set up to speakers?
> No, only on the SBLive.
> NH> If so. Are you sure that when you are getting sound output,
> NH> thats it's through the Creative card, and not the onboard
> NH> one.
> When I run Timidity, or other sound apps, it comes out the speakers
> attached to the SBLive.
> NH> Please run. cat /proc/asound/cards to see what order your
> NH> cards are being loaded, and post it .
> [tmp]# cat /proc/asound/cards
> 0 [Live ]: EMU10K1 - SBLive! Platinum [CT4760P]
> SBLive! Platinum [CT4760P] (rev.5, serial:0x80401102)
> at 0xc000, irq 9 1 [rev21 ]: VIA686A - VIA 82C686A/B rev21
> VIA 82C686A/B rev21 with AD1881 at 0xd000, irq 9
> NH> Do you have Qjackctl installed (the front end to Jack) ? If not,
> I'd suggest NH> installing it, as you can play with a lot of settings. If
> so. Have a look in NH> "Settings" and the box marked Interface. Compare the
> HW # with the card NH> number for the Creative card from cat
> Both 0.
Hi Laura. Are you using the onboard soundcard? Perhaps you could disable it,
either in the BIOS, or from jumpers on the MOBO as I have done. It might help
to remove potential problems, as I see both cards are using irq9. This may or
may not be causing a problem, but if you just have your Audigy card enabled,
at least you are only dealing with that card. Nigel.
More information about the Linux-audio-user