[linux-audio-user] Recording ADAT inputs on RME hammerfall 9636/52

[Stephen Cameron]

--- Stephen Cameron <smcameron at yahoo.com> wrote:
> 
> Mark Krecht wrote:
> 
> [snip]
> > BTW - You can always take the ADAT cable and connected it from the
> > output back to an input, send audio out and then see if you can record
> > audio coming back in. It's a simple test to make sure the
> > Alsa/Hammerfall set up is actually working. If that fails the problem
> > is in your Linux setup, or the ADAT cables. If it works then it's
> > either in the mixer or an interface problem where the mixer and the
> > Hammerfall are not somehow compatible. (Or how you've configured your
> > mixer I suppose....
> 
> Oh, now that's a good idea.  I can probably do the same 
> on the AW as well.  Thanks.  
> 
> I found jackbitscope here, btw: 
> http://www.ecs.soton.ac.uk/~njl98r/code/ladspa/bitscope/
> Thanks for that...
> 
> I'll post what I find out tonight.

Well, something came up and I wasn't able to try out as much
as I wanted to last night, but I did try the loopback test
with the AW4416 talking to itself over 50 foot ADAT cable,
and that worked.  At least I know it's possible to use the
cables under some circumstance.

-- steve


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com