[linux-audio-user] xmms does not play on multiface

[Dragan Noveski]

>>>
>>> in my ~/.asoundrc and use `hdsp_analog` as output device in xmms.
>>>       
please, can you tell me how do you set this?
in my case "options-settings-configure output plugin" only accepts 
something
which begins with  "/", like "/dev..."what ever, but it does not 
accepts  "hdsp_analog"?
>>> Mor infos to goup your channels can be found here:
>>> http://www.linuxjournal.com/article/7024
>>>
>>> regards 
>>> Martin 
>>>
>>>
>>>   
>>>       
>>     
> hi,
>
> I think that's because hdsp_analog isn't initialized. If your hdsp is
> hw:0 then you have to set pcm.hdsp to card 0.
>
> Your asoundrc should look like this then (added groups for adat and
> spdif like in the article above):
>
> pcm.hdsp {
>         type hw
>         card 0
> }
> ctl.hdsp {
>         type hw
>         card 0
> }
> pcm.hdsp_analog {
>         type plug
>         ttable.0.0 1
>         ttable.1.1 1
>         ttable.2.2 1
>         ttable.3.3 1
>         ttable.4.4 1
>         ttable.5.5 1
>         ttable.6.6 1
>         ttable.7.7 1
>         slave.pcm hdsp
> }
> pcm.hdsp_adat {
>         type plug
>         ttable.0.8  1
>         ttable.1.9  1
>         ttable.2.10 1
>         ttable.3.11 1
>         ttable.4.12 1
>         ttable.5.13 1
>         ttable.6.14 1
>         ttable.7.15 1
>         slave.pcm hdsp
> }
> pcm.hdsp_spdif {
>     type plug
>     ttable.0.16 1
>     ttable.1.17 1
>     slave.pcm hdsp
> }
>
>   
ok, changed.
> you can check the number of your hdsp through:
>
> cat /proc/asound/cards
>   

nowhiskey at murija2:~$ cat /proc/asound/cards   
 0 [DSP            ]: H-DSP - Hammerfall DSP
                      RME Hammerfall DSP + Multiface at 0xd2000000, irq 11
 1 [Audio          ]: USB-Audio - USB Audio
                      USB Audio at usb-0000:00:1d.1-2, full speed
 2 [I82801DBICH4   ]: ICH4 - Intel 82801DB-ICH4
                      Intel 82801DB-ICH4 with AD1981B at 0xd0100c00, irq 11
nowhiskey at murija2:~$
> and test your setting using 
>
> aplay -d hdsp_analog <path_to_a_wav_or_pcm_file"
>
> is this doesn't work try to check if it's usable as plugdevice:
>
> aplay -d plughw:0,0 <path_to_a_wav_or_pcm_file"
>
>   
that both works.

but i found out that stopping jack and starting xmms than, everything 
runs  good, so the problem must be with "jacklaunch" ?
> good lucknowhiskey at murija2:~$ cat /proc/asound/cards    
>  0 [DSP            ]: H-DSP - Hammerfall DSP
>                       RME Hammerfall DSP + Multiface at 0xd2000000, irq 11
>  1 [Audio          ]: USB-Audio - USB Audio
>                       USB Audio at usb-0000:00:1d.1-2, full speed
>  2 [I82801DBICH4   ]: ICH4 - Intel 82801DB-ICH4
>                       Intel 82801DB-ICH4 with AD1981B at 0xd0100c00, irq 11
> nowhiskey at murija2:~$ 
> Martin
>
>
>   
cheers,
doc