[linux-audio-user] Qjackctl setup

[Rui Nuno Capela]

joel silvestre wrote:
> Hi,
> 
> I can't see no more detailled information about Interface Input Device
> and Output Device in the Setting window.
> The "> " button to select PCM , input and output devices show only
> (default).
> 
> aplay -l and arecord -l gives :
> 
> [moa at portable ~]$ aplay -l
> **** List of PLAYBACK Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: ALC880 Analog [ALC880 Analog]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 2: ALC880 Digital [ALC880 Digital]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
> card 1: default [USB Audio CODEC ], device 0: USB Audio [USB Audio]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
> [moa at portable ~]$ arecord -l
> **** List of CAPTURE Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: ALC880 Analog [ALC880 Analog]
>   Subdevices: 2/2
>   Subdevice #0: subdevice #0
>   Subdevice #1: subdevice #1
> card 0: Intel [HDA Intel], device 1: ALC880 Analog [ALC880 Analog]
>   Subdevices: 2/2
>   Subdevice #0: subdevice #0
>   Subdevice #1: subdevice #1
> card 1: default [USB Audio CODEC ], device 0: USB Audio [USB Audio]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
> 
> 
> This happen with Qjackctl 0.2.20.10 and Mandriva 2007. I try on two
> different laptop and it's the same.
> 
> What can I do?
> 

What's in /proc/asound/pcm ?

-- 
rncbc aka Rui Nuno Capela
rncbc at rncbc.org