[linux-audio-user] Qjackctl setup

Rui Nuno Capela rncbc at rncbc.org
Sat Oct 21 08:52:52 EDT 2006


joel silvestre wrote:
> Le samedi 21 octobre 2006 à 11:27 +0100, Rui Nuno Capela a écrit :
>> joel silvestre wrote:
>>> Le vendredi 20 octobre 2006 à 22:48 +0100, Rui Nuno Capela a écrit :
>>>> joel silvestre wrote:
>>>>> Hi,
>>>>>
>>>>> I can't see no more detailled information about Interface Input Device
>>>>> and Output Device in the Setting window.
>>>>> The "> " button to select PCM , input and output devices show only
>>>>> (default).
>>>>>
>>>>> aplay -l and arecord -l gives :
>>>>>
>>>>> [moa at portable ~]$ aplay -l
>>>>> **** List of PLAYBACK Hardware Devices ****
>>>>> card 0: Intel [HDA Intel], device 0: ALC880 Analog [ALC880 Analog]
>>>>>   Subdevices: 1/1
>>>>>   Subdevice #0: subdevice #0
>>>>> card 0: Intel [HDA Intel], device 2: ALC880 Digital [ALC880 Digital]
>>>>>   Subdevices: 1/1
>>>>>   Subdevice #0: subdevice #0
>>>>> card 1: default [USB Audio CODEC ], device 0: USB Audio [USB Audio]
>>>>>   Subdevices: 1/1
>>>>>   Subdevice #0: subdevice #0
>>>>> [moa at portable ~]$ arecord -l
>>>>> **** List of CAPTURE Hardware Devices ****
>>>>> card 0: Intel [HDA Intel], device 0: ALC880 Analog [ALC880 Analog]
>>>>>   Subdevices: 2/2
>>>>>   Subdevice #0: subdevice #0
>>>>>   Subdevice #1: subdevice #1
>>>>> card 0: Intel [HDA Intel], device 1: ALC880 Analog [ALC880 Analog]
>>>>>   Subdevices: 2/2
>>>>>   Subdevice #0: subdevice #0
>>>>>   Subdevice #1: subdevice #1
>>>>> card 1: default [USB Audio CODEC ], device 0: USB Audio [USB Audio]
>>>>>   Subdevices: 1/1
>>>>>   Subdevice #0: subdevice #0
>>>>>
>>>>>
>>>>> This happen with Qjackctl 0.2.20.10 and Mandriva 2007. I try on two
>>>>> different laptop and it's the same.
>>>>>
>>>>> What can I do?
>>>>>
>>>> What's in /proc/asound/pcm ?
>>>>
>>> [moa at portable ~]$ cat /proc/asound/pcm
>>> 00-02: ALC880 Digital : ALC880 Digital : playback 1
>>> 00-01: ALC880 Analog : ALC880 Analog : capture 2
>>> 00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 2
>>> 01-00: USB Audio : USB Audio : playback 1 : capture 1
>>>
>>>
>> That's what's supposed to appear on the popup menu when you press the
>> ">" button on the right oto the Interface and Input/Output Device
>> fields. Provided you have "alsa" as current selected Driver.
>>
>> Did you, for any instance, built qjackctl _without_ ALSA support? That
>> must be the case. Try rebuilding qjackctl but make sure you have
>> alsa-devel installed.
>>
>> Cheers.
> 
> Qjackctl has been installed with official Mandriva rpm.
> So if Mandriva built it without ALSA support it's looks like a
> Mandriva's bug?
> 
> Thank's

Check whether the MIDI tab on the Connections window is enabled and
functional. If not, either it was explicitly built with ./configure
--disable-alsa-seq, or the alsa-devel package (probably libalsa-devel in
mdk.rpm) was not installed at build time. Certainly, a serious packaging
flaw for a generalist distro as Mandriva used to be.

Cheers.
-- 
rncbc aka Rui Nuno Capela
rncbc at rncbc.org



More information about the Linux-audio-user mailing list