[LAU] Installing realtime kernel - getting it to work.

[Brad Fuller]

Geoff Beasley wrote:
> g'day Brad. 
>
> emerge rtirq. that'll take care of the irq prio. in qjackctl set your prioity 
> to -1 off your rt clock (rtc). to check what that is, use: 
>
> ps -Leo rtprio,cmd,pid
>
> my rtc is set to 80, so i set the priority in qjackctl to 79 and it's 
> magnificent.
but:

# cat /proc/interrupts
           CPU0      
  0:    4821170    XT-PIC-XT        timer
  1:         10    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  5:          3    XT-PIC-XT        ohci1394
  6:          5    XT-PIC-XT        floppy
  7:          0    XT-PIC-XT        parport0
  8:          2    XT-PIC-XT        rtc
  9:      63360    XT-PIC-XT        acpi, uhci_hcd:usb2
 10:     177569    XT-PIC-XT        ICE1712
 11:     107572    XT-PIC-XT        uhci_hcd:usb1, eth1
 12:        112    XT-PIC-XT        i8042
 14:      51509    XT-PIC-XT        ide0
 15:      36626    XT-PIC-XT        ide1

My rtc is IRQ 8 and according to the other list, [IRQ8] is set to 
priority 90. Who would set that?