[LAU] Re: [LAA] [ANN] Tapeutape 0.0.5 and Tranches 0.0.5

[James]

Mysth-R helped me, and recommended putting each kit in its own setup, which
seemed to work. http://r2h.org/rtjc.tap is the tap fie.

and as for lash, i'm not sure about the proper directory. i'm using
glashctl, so i start the session, load seq24, then tapeutape (or tranches),
right-click glashctl and hit save, and that's when tapeutape segfaults. so i
assume the directories are proper, cause the other programs save to them (in
this case, i guess the default: /home/audio-project/project-n)

i'm running tapeutape from a terminal, in the directory that contains the
tap file. does that make a difference? hold on i try. well, i tried moving
the lash directory (via the glashctl's "move directory" menuitem) into the
directory with the tap file, where i ran tapeutape rtjc.tap, and then
clicked save session and it still pooped out on me.

how do u run ur lash?

On 4/17/07, Florent Berthaut <hitmuri at no-log.org> wrote:
>
>  James a écrit :
>
> oops, pan was set to 1, i'll shuddup now
>
> except... i've go one 808 on <kit name="808"> and a 909 on <kit
> name="909"> and all the 808 instruments on channel 1 and all the 909
> instruments on channel 2, with each kit sent to its own jack-output. but
> from channel two, i can't seem to get any sound. sorry if im bothering u
>
> On 4/17/07, James <everamzah at gmail.com> wrote:
> >
> > along with keyboard input, mouse input would be great too. again, one
> > can use a separate program for this.
> >
> > tapeu2tape stereo: i'm afraid i may be doing something wrong here, but,
> > i can't seem to get any output in the -L channels. i just end up connecting
> > -R to both alsa L/R inputs. any ideas?
> >
> >  ------------------------------
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.orghttp://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
>
>
> Hi ,
>
>
> i'll have a look at the problem with lash because it doesn't segfault here
> (and anyway the alsa midi client isn't registered in lash yet).
> Is the LASH project directory correct ?
>
> For your second question, could you send the .tap file so I can have a
> look ?
>
> (it will be a lot simpler when the configuration window is done)
>
>
> Flo
>
>
>
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
> http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
>
>


-- 
r2h.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20070417/a3e9908c/attachment.htm