[linux-audio-user] Tuning Jack: Please help me prioritize IRQ 10

[Joe Hartley]

I hate following up on my own post, but...

On Sat, 20 Jan 2007 16:28:56 -0500
Joe Hartley <jh at brainiac.com> wrote:
> Here's a novel twist on all of this:  my sound and video cards don't seem
> to exist on my FC5 system, so I can't run this command!
> 
> For example, my audio card is a Delta 1010.  lspci -v shows it:
> 02:0b.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)
>         Subsystem: VIA Technologies Inc. M-Audio Delta 1010
>         Flags: bus master, medium devsel, latency 64, IRQ 11
> 
> However, it's not in /proc/interrupts, and trying to use chrt as shown
> above fails:

I did a "service alsasound restart" and it now shows up in /proc/interrupts:
 17:          2          0  IO-APIC-level  [........./  0]  ehci_hcd:usb1, ICE1712

I'm not thrilled that it's sharing an IRQ, time for some BIOS playing I think.

-- 
======================================================================
       Joe Hartley - UNIX/network Consultant - jh at brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa