[linux-audio-user] [RME HDSP 9632] No sound

[j.c.w.]

Hey there,

You need the snd-rme9652 module.  I don't have any of the hdsp stuff  
at all (to my knowledge).  The contents of the file produced by

"alsactl store -f myconfig.conf" might prove useful once you have the  
snd-rme9652 loaded and all that jazz.

I have the 9632 with the daughter I/O cards up and running without  
any issues and i also run debian/sid.

Good luck and shout if getting the module in doesn't do the trick.   
Folks please feel free to jump in if I'm misleading this poor chap.   
It's been a while (fortunately) since I've had to dig into any of this.

rock on.

j.c.w.
http://othertime.com


On Mar 10, 2007, at 10:42 AM, Bibulus wrote:

> Hi all,
>
> I just bought a RME HDSP 9632 today but I cannot make it work.
>
> Yes, another guy with this same eternal problem...
>
> I already know that this card is (should be?) well supported under
> GNU/Linux (and in fact it is why I bought it)...
>
> My system/conf is:
>
> -----
> * Distro: Debian/Sid
>
> * Kernel: vanilla 2.6.20.2 (+ realtime-lsm) with the following  
> specific
> ALSA modules:
>
> 		RME Hammerfall DSP Audio
> 		RME Digi96, 96/8, 96/8 PRO
> 		RME Digi9652 (Hammerfall)
>
> What is the module I must use for a 9632?
>
> $ lsmod | grep hdsp
> snd_hdsp               43812  0
> snd_rawmidi            18848  3 snd_seq_virmidi,snd_hdsp,snd_seq_midi
> snd_pcm                59908  3 snd_rme96,snd_hdsp,snd_pcm_oss
> snd_page_alloc          8328  2 snd_hdsp,snd_pcm
> snd_hwdep               7428  1 snd_hdsp
> snd                    41828  12
> snd_seq_virmidi,snd_rme96,snd_hdsp,snd_seq_oss,snd_seq,snd_rawmidi,snd 
> _seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
> $ lsmod | grep rme
> snd_rme96              20516  0
> snd_pcm                59908  3 snd_rme96,snd_hdsp,snd_pcm_oss
> snd                    41828  12
> snd_seq_virmidi,snd_rme96,snd_hdsp,snd_seq_oss,snd_seq,snd_rawmidi,snd 
> _seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
> -----
>
> I even try to use "hdsploader", but as far as I understand how it  
> works,
> it is not required for the 9632:
>
> -----
> $ hdsploader
> hdsploader - firmware loader for RME Hammerfall DSP cards
> Looking for HDSP + Multiface or Digiface cards :
> Card 0 : RME Hammerfall HDSP 9632 at 0xdcdd0000, irq 16
> -----
>
> Do you need more informations/screenshots about my system/conf?
>
> I have installed "alsa-tools" and "alsa-tools-gui" for "hdspmixer" and
> "hdspconf".
>
> "alsamixer" give me very poor information (but I have unmutted all I
> could unmutted with it).
>
> I have tried to use a ".asoundrc" file, but with no success.
>
> -> Notice that before RME I used to work with a Audigy2 and all was  
> ok.
> But now the only little "sound" I can have is with jack (and only on
> playback_9 port, in the headphone left part).
>
> Any idea?
>
> Thanks for your help...
>
> Bye
>