[LAU] ANNOUNCE: PHASEX v0.10.0

[Nigel Henry]

On Saturday 05 May 2007 00:46, Ken Restivo wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Fri, May 04, 2007 at 08:10:12PM +0100, James Stone wrote:
> > On Fri, May 04, 2007 at 05:52:16PM +0200, Nigel Henry wrote:
> > > On Friday 04 May 2007 05:42, William Weston wrote:
> > > > On Thu, 3 May 2007, Nigel Henry wrote:
> > > > > Well it looks superb. I've still to hear it, as I'm attempting to
> > > > > initially build it on FC2, but am getting a problem with "make".
> > > > >
> > > > > What are the build requirements for Phasex? I don't want to waste a
> > > > > lot of time trying to get it to build on FC2, if it's not possible.
> > > >
> > > > I wouldn't expect it to be possible on FC2.  Not until I take the
> > > > time to make the GTK code compile on older versions of GTK-2.x.
> > > >
> > > >
> > > > Could you let me know how that FC5 and Debian builds go?
> > > >
> > > > Thanks,
> > > > --ww
> > >
> > > It builds ok on Debian Etch, using v0.10.1, but segfaults after a few
> > > seconds, even without touching anything on the GUI. If I try to load a
> > > patch, or open the file menu, it segfaults immediately. GTK version on
> > > Etch is libgtk2.0-0 installed 2.8.20-7.  Output from starting Phasex on
> > > the CLI below.
> >
> > Strangely, it builds and plays fine on my Debian system... I have
> > been running SID, but have not updated everything for quite some
> > time, so some of my stuff will be newer than Etch, some older.
> >
> > My version of GTK is libgtk2.0-0 (that's the rather confusing
> > Debian name for it, because actually it is 2.10.11-2).
>
> Also runs fine on mine too. Debian Etch. With GTK 2.8.20-3. On AMD64.
>
> - -ken

All a bit odd. As I mention above, my gtk version is 2.8.20-7. If I start 
Phasex on the Etch machine it segfaults after some seconds. If I ssh into 
Etch from FC2, and start Phasex from FC2, there are no problems, and can do 
what I like with the synth.

I get exactly the same problem on the same machine that Etch is installed on, 
with FC5. Phasex segfaults when running it on FC5, but if I ssh into FC5 from 
FC2, and run Phasex from FC2 there are no problems.

Nigel.